Head Gaskets and Valve Covers
Dodge Ram
Dodge D100
Chevy Camaro RS

What is the torque specifications on the head bolts of a 3.1 v6 in a 92 camaro RS?

525354

Top Answer
User Avatar
Wiki User
Answered
2009-04-06 18:17:17
2009-04-06 18:17:17

First step: 40 Ft/Lbs Second step: Tighten an aditional 90 degrees.

001
๐Ÿ˜‚
0
๐ŸŽƒ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
User Avatar

Related Questions


What are the torque specifications and the tightening sequence of the cylinder head bolts on a 1996 Saturn SL1?



The head bolt torque specifications are 150 pounds per square inch. The head bolts should be torqued in 50 pound intervals.


The Chevrolet 2.2 liter engine had bolt torque specification is 120 pounds. The head bolts should be torqued in 40 pound intervals.


Ford CFord Cylinder Head Torque Specificationsylinder Head Torque Specifications


The head bolt torque specifications, for your Honda Accord 2.2 liter engine, is 120 pounds per square inch. The head bolts should be torqued in 30 pound intervals.


Head bolts are 44 psi tightened 3 times in the proper pattern


A C15 Caterpillar engine has dozens of torque specifications for many different engine bolts. The head bolts should be torqued at 350 pounds.


The Ford Taurus head bolt torque specifications are 160 pounds per square inch. The head bolts should be torqued in 40 pound intervals.


The head bolt torque specifications, on your Mazda 626, is 120 pounds per square inch. The head bolts should be torqued in 40 pound intervals.



Cylinder head bolts torque is 59-64 ft lbs (cold).I suggest rechecking the torque after about 500 miles or later.And always recheck with engine cold(meaning not run for the day).


you don't have to have the head checked but its recommended. the head bolts are supposed to be torqued in counterclockwise order from the inside bolts to the outside bolts. torque them in order in three stages to 18 ft/lbs then to 27 ft/lbs then an additional 120 degrees except the front right stud which you torque to 90 degrees


The torque specifications, for your 2002 Kia cylinder head, is 120 pounds per square inch. The head bolts should be torqued in 40 pound intervals.


the longer (new bolts) are to torqued to 48lbs and the shorter ones are to be torqued to 45lbs then turn the bolts an additional 90 degrees the bolts need to be replaced with new one because they are streched when you torque them down


The cylinder head bolt torque specs for a 1995 Chevy S10 2.2L are as follows: 1st: Torque the long bolts to 46 ft lbs, short bolts to 43 ft lbs 2nd: Turn all bolts an additional 90 degrees


The head bolt torque specifications for the 1986 Chevrolet Corvette is 200 pounds per square inch. The bolts should be torqued at 50 pound intervals.



The head bolt torque specification for a 3.3 liter engine is dependent upon the manufacturer of the engine. In general, the 3.3 liter engine had bolt torque specifications is 120 pounds.


torque for 2c engine cylinder head bolts


The torque specifications for the cylinder had, in your 2003 Kia 1.6 liter engine, is 120 pounds per square inch. The bolts should be torqued at 40 pound intervals.


IT DEPENDS ON THE HEAD BOLT MFG. STOCK HEAD BOLTS ARE 65 FT.LBS TO 72 FT. LBS! ANY OTHER BOLT YOU TYOU NEED TO GO BY WHAT THEY SAY!


torque setting for cylinder head bolts for a skoda felicia


The head bolt torque specifications, for a Caterpillar 3024 diesel engine, is 170 pounds per square inch. The bolts should be tighten at 50 pound intervals.




Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.