10-100 usd
barrel, butt, receiver, under forearm.
CHeck the receiver and under the forearm
On the under side of the receiver, right ahead of the lever mechanism. Just behind where the forearm contacts the receiver.
Make sure the shotgun is empty. Look in the chamber and the magazine tube. Pull the slide back and remove the end-cap and then the barrel needs to come off forward and out of the receiver. Slide the forearm forward and reach a finger into the right front side of the receiver. You will feel the right side cartridge guide. Push that up against the right side of the receiver wall while sliding the forearm forward and the forearm will come out of the receiver along with the bolt. Assembly is in reverse order.
usually the stock is behind and the forearm is in front of the receiver.
Check the bottom of the lower receiver just behind the forearm wood.
The serial number should be stamped on the bottom of the receiver next to the forearm.
Bottom of the receiver, right in front of the lever mechanism where the forearm attaches.
Check the top of the receiver and under the forearm.
If it is a Side by Side like my Western Long Range Gun, pop off the forearm - mine is marked in three places: the wood of the forearm, the metal of the forearm, and on the action. My Model 37 has the serial number stamped on the front of the reciever, opposite the slide for the pump. It is in the area between the magazine tube and the barrell.
Yes. It has a white forearm and butt-stock with a blue barrel and receiver.
No