answersLogoWhite
Lefever Arms Company

What is the value of a Lefever long range trap and field single barrel 12g and what precautions should be taken in cleaning it?

636465

Top Answer
User Avatar
Wiki User
2005-02-27 05:09:25
2005-02-27 05:09:25

The Blue Book suggests a value of $120 in 60% condition, $250 in 90% or $330 in 100%. Don't over-clean. Copper wool (not steel wool) and gun oil to remove the rust if it has any. Then give all metal parts a light coat of gun oil and use a good furniture polish on the wooden parts. Don't get the oil on the wood or the polish on the metal.

1

Related Questions

User Avatar

Mfg 1925. Serial numbers are stamed on the barrel flats, on the water table (receiver) and on the forend. They should all match.

User Avatar

When cleaning hardware first you should always make sure it is unattached from the tower and then keep it off of carpet. Also make sure not to touch the motherboard because of chance of electrical shock.

User Avatar

What safety precautions should be taken

User Avatar

Any experience that might apply to a task performed at Cracker Barrel. Experience with cooking, cleaning, washing, sweeping andf things like that.

User Avatar

What precautions should be taken after a hurricane hits?

User Avatar

Wha precautions should you take when preparing food

User Avatar

after the cataract surgery sir pls advice what precautions should i take. pls advice

User Avatar

Precautions are few with the tilt table test. However, when any drug is used with this test, the appropriate precautions for that particular drug should be observed

User Avatar

Where infectious diseases are the issue, there is no difference between universal precautions and standard precautions. The suite of procedures called "universal precautions" should now be the standard precautions used in all cases of patient contact.

User Avatar

10 precautions to take when dealing with computer

User Avatar

Assuming it is a sidelock gun, which it should be, it was made c.1912. We still need to know what grade, and most especially the condition. Digital pictures would be a huge help. sales@countrygunsmith.net

User Avatar

how can you determine precautions that should be followed while using a hazardous chemical

User Avatar

When caring for animals, and in all your other activities, you should practice appropriate safety precautions because you do not want to be injured or worse, and precautions help you avoid that.

User Avatar

Precautions should be taken to protect patients from unnecessary exposure to radiation. Patients should be shielded with lead aprons as much as possible.

User Avatar

Ipecac should never be used to induce vomiting if the poison is one of the following: strychnine, alkalis (lye), strong acids, kerosene, fuel oil, gasoline, coal oil, paint thinner, cleaning fluid

User Avatar

The most important precaution to take before cleaning you air conditioner is to make sure the power supply is shut off. After that you simply remove the debris from the inside and outside, and use a hose to spray all the dirt from inside the unit.

User Avatar

There are a great many different types of experiments, and they require different types of precautions. The general answer to the general question is, take all due precautions.

User Avatar

Whenever you are performing a reaction that involves toxic fumes you should use precautions. You should wear goggles, gloves, a gas mask and an apron.

User Avatar

They should be sure that in the kitchen they use ONLY the chemicals that are safe to use around food preparation. They should also know how to use the chemicals, what precautions to take, and what to do if these chemicals accidentally come in contact with their skin, face, or eyes.

User Avatar

Standard precautions must always used when delivering patient care.

User Avatar

Your going to need a 20 cal (5.5 cleaning rod), you can find them online or at a large sporting goods store. Put the rifle on safe. Open the loading breech Slide the cleaning rod down the barrel and force the plastic BB back out trough the loading breech. This should clear the barrel.

User Avatar

The answer is that you don't. Dissassembly of the "bolt" on a Auto-5 is a complicated process and should be attempted by a quallified Gunsmith, or other trained person. The bolt you refer to, is called the Breech Block. Cleaning is to be done with the breech block assembly in place. Remove the barrel when cleaning. You can always use a pipe cleaner to get behind the Block.

User Avatar

It should be stamped on the barrel It should be stamped on the barrel


Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.