What is the value of a craftsman wood lathe model?
Yes, why? Are you having trouble fiinding a manual too?.... Just need a motor-
Probably between about 1946 and 1954
Aha, look at Old Woodworking Machines web site at OWWM - Craftsman - Publication Reprints - 113.228000 Craftsman 12-inch Wood Turning Lathe http://www.owwm.com/mfgindex/pubdetail.aspx?id=1985 What a surprise, someone has scanned a copy for poor souls like you and me.
A lathe is a machine that is used to carve wood or metal by turning it.
Try the manufacturer's site at http://www.general.ca. They should be able to help.
a machine to shape wood
Its the chisel, or lathe chisel which is used to shape the wood as it spins horizontally in the lathe. Bed posts, table or chair legs and porch posts are some examples of items that can be turned on a wood lathe.
Lathes are made for many different materials, metal, wood, plastics, composites, etc., metal lathes can turn wood, plastic or many other materials and conversely speaking a wood lathe can do the same. I have turned on a metal lathe, metal, wood, plastic, rubber, composites. On wood lathes I have turned wood, metal, plastics, and composites. Note: turning metal on a wood lathe is misleading, spinning metal is the correct term, spinning on a wood lathe… Read More
On a wood turning lathe, the faceplate is screwed to the piece of wood, then the faceplate is held in place by the chuck. This facilitates free-wheeling the opposite end for such items as bowls. Almost similar to a wood turning lathe, the face plate on a metal lathe is a device that is used instead of a chuck. It allows a workpiece to be clamped or bolted to it for machining.
A lathe belongs in a woodturning shop that usually makes specialist furniture and wood railings
The lathe (apparatus for turning wood or metal) is called "un tour" (masc.) in French.
(Please note - the folllowing explanation is for wood latt NOT lathe) A piece of wood, fairly flexible, usually about two inches wide and about a 1/4 to 1/2 inch thick and as long as necessary. It is used for lattice work and is often found as a base for plaster walls in older homes. Wooden table legs are turned ona wood lathe - the wood lathe is used to make a square pole of… Read More
i wood like to know the value of a Fox Model B
Lathe - narrow wood strips. Plaster - like cement, but not as hard.
A woodturning chuck is the device that holds a piece of wood in a lathe. Wood is worked in a lathe when one wants to produce a 'turned' piece of wood such as a spindle. Different woodturning chucks are used for different sized and shapes of wood to be 'turned'.
A lathe is a tool used in woodworking to shape pieces of wood into usable objects. Different types of tools can be used to shape the wood in a desired style.
your model 62 Winchester was made in 1935,as to value it wood be determined by many factors such as wood condition the amount of finish left on the wood,the condition and amount of blueing left on the firearm etc.
where can you buy all the wood parts for a 22 model number 87b where can you buy all the wood parts for a 22 model number 87b where can you buy all the wood parts for a 22 model number 87b
A lathe has one workpiece spinning on an axis, which the operator holds a tool to to cut the material. A duplicator has two workpieces, and a probe touching one piece causes a tool to cut in to the other, creating a duplicate of the probed piece.
It is possible considering the correct requirements.
about $250 in clean condition
Yes, by looking online for a qualified wood craftsman in your area. You can also ask at some Home hardware stores if they know of a craftsman who does customization in the city or town where you live.
hammers, saws, wood chisels, wood plains, gauges, foot operated wood lathe, etc.
To use a wood turning lathe, first one must read all instructions and don the proper safety attire needed to operate this machinery. Next a piece of wood needs to be locked into the machine's head stock and the tail stock. Step three requires turning on the wood lathe machine, always start at the lowest setting. Finally a chisel is carefully place against the turning wood to create different shapes and forms.
the value of your model 75 Winchester depends on many conditional values such as amount of blueing left wood condition etc. but your model 75 Winchester was made in 1941.
Lathes can be used for many materials, metals, plastics, woods, rubber, many types of materials require certain kinds of lathes and/or grinders, I have used a grinder for shaping and resurfacing rubber, aluminum, brass, bronze, nylon, plastics, etc., lathes are the same way, some materials require a machinists lathe where as a wood lathe can be used for select materials. I said all that to explain the importance of the material you will use to… Read More
before we can determine the value please add if your model 94 is a rifle(24in-26 in barrel) or carbine,is it a take down model?( can it be taken down into 2 pieces) Is there special wood engraving etc. is the barrel round or octagon? these questions will help to better determine the value of your winchester.also add the amount of finish left on the wood and blueing on the metal.
It depends. The term, craftsman, is basically one who specialises in a particular skill. So a carpenter would offer items crafted with wood.
remington model 512 value, as with all items, depends on condition. how good in the finish, wood, bore. Any rust/pitts. between $75 - $100 if good
It will cost about 85 to 200 dollars it depends on what you want on it.
R. Gustavsson has written: 'Creating in wood with the lathe'
400 dollar range
it has a wood stock with a small chip shotgun is in fair condition
What is the age and approximate value of a model 1894 with serial number 627504 in original condition?
your model 1894 rifle was made in 1912,as to the value that depends on amount of blueing,condition of the wood,and the condition of the bore etc.
You make a bat by turning it on a wood lathe. A squared piece of wood that is just a few inches longer than the finished length of the bat, is mounted onto a lathe and the woodturner works the piece of lumber (usually ash) with woodturning chisels, gouges, etc.
value of a blaze king model ktj 302 wood burning stove
There are any number of items you can make on a wood lathe. It's going to depend on the size of the lathe, the materials available to you and your skill level. On a larger lathe, (24" or better) you can start making things such as spindles for railings, balusters, table and furniture legs, any number of decorative items. You can also make things such as baseball bats, clubs, self-defense night sticks and such. You… Read More
Your Winchester model 62 was produced in 1947.The value is running between 250-350 dollars depending on original condition of the wood and metal.
75-300 USD or so
Round pieces of wood are made with a lathe. Products include table legs, porch railings, and dowel rods. Any three dimensional shape can be made with a lather.
The cutting tools on a lathe are the actual tool that removes material from the workpiece to shape it into the desired dimension. Metal and wood lathes have different cutting tools and can not be used transversely.
A lathe in a small wood or metal shop has a motor that connects to the lathe by belt. In a "direct drive" lathe the motor connects directly. I assume that "all gear" means direct drive, no belt. A belt drive protects the motor from damage and reduces vibration of the lathe. In addition, the belt allows you to change the gear ratio and thus the speed of the lathe without changing the motor speed… Read More
it turns wood you can make table legs with it and bowls and other cylindrical objects with it
It is done on a lathe and is called Turning.
With model wood!
Plane. I vote for lathe. Planes are used more for flattening or simply removing excess material. Wood lathes, on the other hand, are definitely for shaping wood.
What is the value of a smith and Wesson 38 special ctg with a black barrell and wood handle model 14-4?
the model if the gun is near perfect condition is 500
In order to give you a good answer to your question,I would need to know the serial number of your Model 63(to date the production year) and the overall condition of the blueing,wood,and bore to give you a accurate answer as to value.