Intake valves are set at 4 thousandths and exhaust set at 6 thousandths.
Intake: 0.10-0.15 mm (0.0039-0.0059 in) Exhaust: 0.15-0.20 mm (0.0059-0.0079 in) ....COLD
0.012
what is the torque specs and valve lash on a 24 hp Briggs
how to adjust vavles on 2.2 1998 s10
.004 to .006 in. on the intake and .006 to.008 in. on the exhaust
Valve lash specs on the H Farmall 1942 Serial number 106300 refer to the tune up specifications for that particular tractor. On some varieties, the point gap is .020 and on some the timing mark is on MP.
From the Honda spec book: Intake = .002", Exhaust .002"
The valve lash is not adjustable on that engine. The rocker arms are bolted down and torqued to specs. If you have valve clatter you have worn valve train parts.
Purchase a Haynes or Chilton's repair manual at any auto parts store. Here you will find all the valve and torque specs.
When the engine is hot .008 intake .012 exhaust or .007 intake .011 exhaust When the engine is cold
I want to know the number for the valve lash adjustment.
What is the valve lash on a cummins engine 16 V