What is the wheel size bolt pattern and offset for a 1985 Chevy impala?

Neither, there is no such thing as a 1997 Chevy Impala

Front wheel drive. The last rear wheel drive Impala made was the Impala SS in 1996. ...

Is the estimated tuck in or out from the center of the wheel, example: (nissan sentra) 18x7.5 +40 offset is tucking in 40 mm from the center of the wheel or (old chevy pickup) 15x7.0 -10 offset is sticking out 10 mm from the center of the wheel. ...

bolt pattern is 5x114.3 offset is medium high

5 per wheel for a total of 20.

Remove the tire and wheel from your 2001 Chevy Impala. Remove the end of the axle. Remove the wheel bearing nut. Remove the wheel bearing seal and the wheel bearing. Reverse the process to install the new front wheel bearing. ...

Not sure on earlier models but 2000 thru 2010 are 8 lug 6.5 inch or 165.1 Standard Offset 2011 changed to a 8 lug 180 mm Medium Offset pattern Hope this helps ...

Bolt pattern 5x114.3 or 5x4.5 Offset 40mm

For a 2WD: Bolt Pattern (mm), (in) :5x120.7, 5x4.75 , Offset (mm): -13 to 20 , Wheel Size Range : 15x6.0 to 20x8.5 For a 4WD: Bolt Pattern (mm), (in) : 5x120.7, 5x4.75 , Offset (mm): 34 to 50 Wheel Size Range : 15x6.0 to 22x9.5 ...

The bolt pattern is 5x114, but I dont know the offset of the stock rims.

The Mercedes bolt pattern is 5x112 The factory W211 offset is ET35

Only rear drive vehicles have U joints, your impala is a front wheel drive. ...

I have a stock wheel, which seems to sit 1.92 inches from center. That's what I measured, anyways. ...

you can get them at ecklers late great chevy(google them), or imaplas.com

should be 5 per wheel.

1985 Supras (MA67 body style) use a 14" wheel with a 4 x 114.5 bolt pattern. The offset is +7mm ...

You can fit up to a 26X10 305/35/26 tire with a 25mm offset wheel

install 3.8 Chevy impala crank sensor passenger side , remove wheel and use pully to pull out crank shaft ...

Yes, the 22 inch rims will fit onto the wheel of the 2008 Chevy Impala. You can install the rims yourself or have them professionally installed. ...

The wheel bolt pattern for the 2007 Saturn Aura is 5 x 4.33 inches or 5 x 110 millimeters. The offset is high positive. ...

A wheel bearing is pressed in to the hub so that it is able to safely operate. To replace a bearing on a Chevy Impala remove the hub from the car and take the unit to a machinist. Have the press out the old bearing and press in the new one. ...

will the wheels on a 2002 olds silhouette van fit my 1999 lumina

It will have the same bolt pattern, but watch the offset.

Wheel lug nut pattern? NO.

wheel nut torque 2005 impala