does a 2002 mazda protege have a front wheel drive
52.5 bolt pattern is 5x114.3 17" wheels that is
in the stearing wheel
Like any other wheel?
High Positive Offset +35 to +45
Directly in front of the driving seat.
I just replaced a wheel bearing in my, 03 protege 5 it was $60 for the part and $60 for the mechanic to press it in.
the haynes book says take it to a mechanic
under the steering wheel bottom left side
bolt pattern is 5x114.3 offset is medium high
4x100mm offset +45mm
Bolt pattern 5x114.3 or 5x4.5 Offset 40mm
No, you need a press to remove and install the bearing.
you need to press out the bearing inside the hub assembly.
I had this issue with a Honda accord, the sound may be your CV joints and not the wheel itself.
stock wheels on the first gen mx6 is +44 for the 15x6 wheels.
The Mercedes bolt pattern is 5x112 The factory W211 offset is ET35
The bolt pattern is 5x114, but I dont know the offset of the stock rims.
1985 Supras (MA67 body style) use a 14" wheel with a 4 x 114.5 bolt pattern. The offset is +7mm
The steering wheel should be locked when the car is in park. Move the steering wheel a bit then see if the key turns.
i need to change my alternator belt and don't know where the tension wheel is so i can take off the other belt to replace the alternator belt on my 94 Mazda protege 1.6l
5x115 43 offset