0
Add your answer:
Earn +20 pts
What will happen if you use phase to phase voltage for a single phase device?
Phase to phase, two wire is classed as single phase. If the voltage from the phase to phase match the device's operating voltage, then connecting the device will allow it to operate.
When you have 56KVA available in 3 phase supply how much is your available current in 3 phase and how much in 1 phase?
In three phase: I = (three phase VA) / (sqrt(3) x (phase to phase voltage)) for single phase: I = (single phase VA) / ((phase to neutral voltage)) keep in mine three phase VA = 3 x (single phase VA), and phase to phase voltage = 1.732 x (phase to neutral voltage) Therefore the single phase and three phase currents are the same (ie, the three phase currents are the same in all three phases, or balanced). But don't get available current and available power confused (KVA is not the same as KW).
What is the US 3 phase voltage?
A balanced three phase system is composed of three single phase voltages having the same amplitude and frequency but displaced from one another by 120 degrees (1/3 cycle).We know that a single coil (winding) rotating in a magnetic field produces a single phase alternating voltage. Similarly, three phase voltage can be produced by a set of three coils separated from each other by 120 electrical degree. Three phase power is so popular because of following advantages.For a given size of frame, a three phase generator or motor has a bigger output than a single- phase machine.To transmit a given amount of power at a given voltage over a given distance, a three phase transmission line requires less copper than a single phase line.Three phase motors are self starting; single phase motors are not self startingParallel operation of three phase alternators is simpler than that of a single phase alternators.
What is the running amps of a 45 kW motor?
To answer this question the motor's voltage must be stated and whether the supply voltage is single phase or three phase.
Why is mains voltage 230V?
Yes 230 volts is classed as single phase but it is not the only single phase voltage. If you take any two legs from a three phase system, the voltage from these legs is also classed as single phase. The 230 volt single phase is the output of a transformer whose primary is one leg of a three phase primary high voltage system. The 230 volt secondary is center tapped to give 115 volts before the tap and 115 volts after the tap, hence the common voltage of 115/230 that is used in North America.
What is the most typical industrial three-phase voltage in the United States?
The most typical industrial three phase voltage in the United States is 480volts. In Canada it is 600 volts.
What is the Single phase voltage in India?
The single phase voltage in India is 230v when we check with the phase and the nutral single line
What will happen if you use phase to phase voltage for a single phase device?
Phase to phase, two wire is classed as single phase. If the voltage from the phase to phase match the device's operating voltage, then connecting the device will allow it to operate.
What is 3 phase voltage in Germany?
Three-phase voltage in Germany is 400V, single-phase voltage is 230V.
What voltage is found on a single phase motor?
Ac voltage
What is peak voltage value of 3 phase?
The same as in single phase with the same RMS voltage.
What is the most typical industrial three-phase voltage in Thailand?
The most typical three-phase voltage used in China is 380 V.
Three phase voltage in india?
It is 230V single phase and 440V in 3 phase system at 50 Hz.AnswerIf the single-phase voltage is 230 V, then the three-phase voltage must be 400 V, not 440 V. The line voltage is 1.732 times the phase voltage.
What voltage you get at home in India?
The single phase voltage in India is 230v when we check with the phase and the nutral single line
What is the voltage value phase to phase at 180 degrees apart?
Single phase voltages vary throughout the world. To answer this question a basic voltage or country voltage has to be stated.
How three phase line current convert in single phase?
The current is the same in the three live wires. The voltage can be described as the line voltage (phase to neutral) or the phase voltage (phase to phase) which is larger by a factor of sqrt(3). So a line voltage of 230 v corresponds to a phase voltage of 400 v.
When you have 56KVA available in 3 phase supply how much is your available current in 3 phase and how much in 1 phase?
In three phase: I = (three phase VA) / (sqrt(3) x (phase to phase voltage)) for single phase: I = (single phase VA) / ((phase to neutral voltage)) keep in mine three phase VA = 3 x (single phase VA), and phase to phase voltage = 1.732 x (phase to neutral voltage) Therefore the single phase and three phase currents are the same (ie, the three phase currents are the same in all three phases, or balanced). But don't get available current and available power confused (KVA is not the same as KW).
