answersLogoWhite
Auto Parts and Repairs
Alternators
Mitsubishi
Mitsubishi Eclipse

What keeps a Mitsubishi eclipses from running after you just changed the alternator?


Top Answer
User Avatar
Wiki User
2004-11-23 20:44:03
2004-11-23 20:44:03

Did you bump something loose, and made sure you hooked everything back up?

Related Questions

User Avatar

if a battery has a bad cell it wont hold a charge, but it could also be the alternator or the plug, i had a problem with the plug and had to change it from a junk yard, but before you do that i would check the easy parts first i.e the battery,then the cables, then the tension of the alternator belt, and finally the alternator itself along with the pigtail get a volt meter and test the current while the car is running, if it reads 13 to 14 volts the alternator is working and if it reads bellow 12 it is the alternator or plug. aojedam Check your battery, it might be worn out and not able to hold a charge from the alternator.

User Avatar

Check to see if the alternator is working Connect a voltmeter to battery: Without engine running reading should be about 12.8 With engine running reading should be 13.8-14.2 If not bad alternator

User Avatar

If the engine is running and the alternator is good. If the engine is not running, no.

User Avatar

Fuse control the alternator is in engine compartment fuse box reads 100 amp and to find out alternator is good or bad disconnect your ground cable when SUV running .after disconnected and not running just kills motor down, alternator is bad .precaution do not let the ground touch the positive post cable will short your alternator needs to be replace...... hope this helps good luck Montero sports fans.


Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.