87 octane, i recommend running shell 91 vpower once in awhile to keep ur fuel filter clean
5w 30
it takes just about 3 quarts for a normal oil change.
I believe it is 1.5 units.
91 octane my broda
how do you change the sterter on a acura integra the starter is on the passenger side. it is hard to get to depending if it auto or 5spd. there is more cluster in the autos. i have a 5spd. i went from under the car to get to it. just got to take off the bolts. take it out put new one in. make sure it is lined up straight. if not you will here it grind a lil when you go to start the car.
right top of the radior hose first take off the bolts (must be 2) take out the cap, then you will see a thermostat inside then just replace it, that's it! how easy
Bearings require a mechanical press to be properly changed in an Acura Integra. Remove the hub from the vehicle and take it to a press. The machine will properly install a new bearing and ensure a safe install.
acura motors r built to last sum can go up to 200k miles before have to have a rebuilt
1/2 drive Ratchet
It takes about 4.1 qt
You say, oil, so I assume you have a manual transmission which probably uses Honda MTF. Automatics after 1995 use Honda ATF and before some use Dexron. My advice would be to go to your local Acura or Honda dealer and purchase the oil there. Honda transmissions shift better with the OEM fluid, especially the Automatics. Don't take a chance with the wrong lube. Spen the little extra and purchase ACURA/HONDA lube.
Don't take my advice because I don 't know, but take off the old one and put on the new one.