I would consider using polystyrene (often used as a packaging material) It should be easy to buy a small sheet of the correct thickness. It can be cut with a hot knife blade. You can paint it with water based paints and glue with a water based glue - Beware solvents will "melt it" although you could experiment with acetone or a solvent based glue to "age" it, but don't over do it as you will be left with a very small lump of plastic.
Card board , play dough ,
he pyramid is predominately made of limestone blocks weighing an average of 2.5 tons. This was quarried locally at the base of the pyramid. The waste material from this quarrying was mixed with Tafla (a type of clay) and used to make the ramps used in the construction of the pyramid. There is some evidence to suggest that some of the quarries were filled in with the material from the dismantled ramps when the pyramid was completed. The linings for the passageways and the burial chambers were made from Granite brought from Aswan 400 miles upriver from Giza. The pyramid originally had a smooth casing of white stone from Tura on the east bank of the Nile.
The pyramid is predominately made of limestone blocks weighing an average of 2.5 tons. This was quarried locally at the base of the pyramid. The waste material from this quarrying was mixed with Tafla (a type of clay) and used to make the ramps used in the construction of the pyramid. There is some evidence to suggest that some of the quarries were filled in with the material from the dismantled ramps when the pyramid was completed. The linings for the passageways and the burial chambers were made from Granite brought from Aswan 400 miles upriver from Giza. The pyramid originally had a smooth casing of white stone from Tura on the east bank of the Nile.
There are many ways to do this :)You could:Make a pyramid out of paperMake a pyramid out of icy-pole sticksGlue together pieces of stones in a pyramid shape
12. four sticks for the floor. four for the roof and four pillars * * * * * Wrong. The above answer is for a square based prism. The correct answer is 8.
suppose you are an ancient Egyptian stone worker. the queen has hired you to make a pyramid. she will give you 140 blocks of stone. the queen shows u a model using 14 blocks. the model is 3 blocks high. facts: the top layer has 1 block, the second layer has 4 blocks and the third layer layer has 9 blocks. you will be able to use all the blocks if you follow the queens model. Look for the pattern. after awhile the pattern becomes clear. 1.how many layers does your finished pyramid have? 2. how many blocks did you use for each layer? 3. describe the pattern 4. could you make another pyramid with 200 blocks following the same pattern?
Eat someone's butt!
to make a model of a food pyramid take a cardboard and cut it in 3 triangles and then make a triangle shape with those triangles,then go to the web and search pic of foodpyramid
legos Card, Clay
Yes ply wood is a good material to use
They are. For all the material the use, you could make a really strong triangular pyramid.
gobar(cow dung) gas plant is a good example of scientific model with waste material.
By using any material
See related link for a video
I used recycled folders i cut them then taped them
To make the bioscope model you need a number of materials like modelling clay and newspaper. With the material you can proceed to construct the bioscope model.
To make the bioscope model you need a number of materials like modelling clay and newspaper. With the material you can proceed to construct the bioscope model.
You can make a pyramid out of practically anything 4rm cardboard to styrifome to even wood or metal. It is simple just cut out 4 trianlges with the same length and width. Then begin assembeling if the material you are using is wood then you should use wood glue. If its cardboard you could use a hot glue gun or liquid glue. I would not suggest stick glue because of the chance of collapsing. All tips should touch evenly at the top. Now you have yourself a pyramid.