RAM - Random-Access Memory
ROM Read Only Memory
bootstrap
The BIOS contains two things: the low level bootstrap code, and simple I/O drivers for the devices built into the motherboard. Without the low level bootstrap code to initialize the CPU and system hardware there would be no way of loading the high level bootstrap code from disk that will load the OS. The simple I/O drivers will be used by the low level bootstrap code, the high level bootstrap code, and also initially by the OS (until it installs its own I/O drivers).
When the computer start all the essential files, to start the operating system load from disk to the memory.Basically the bootstrap program is loaded into the read only memory(ROM) which enables while the computer start.
This is not always true, it depends on the operating system and the bootstrap process.
Bootstrap Productions was created in 1999.
The OS is installed on the HD, just like any other program. The bootstrap process loads the OS from HD to main memory, where it is executed.
declarative memory
On most computer systems, a small piece of code known as the bootstrap program or bootstrap loader locates the kernel loads it into main memory and startsits execution. Some computer systems, such as PCs, use a two-step process in which a simple bootstrap loader fetches a more complex boot program from disk, which in turn loads the kernel. The bootstrap program can perform a variety of tasks. Usually, one task is to run diagnostics to determine with the booting steps. It can also initialize all aspects of the system, from CPU registers to device controllers and the contents of main memory. Sooner or later, it starts the operating system.
to open the game in gareana just put parameter_445@bootstrap
By first loading a small bootstrap program. The bootstrap program then loaded the OS.It is still done this way, except the bootstrap programon most modern computers is preloaded on ROM so it needs no special action on the part of the operator/user to load it as was needed on the early computers.Some early computers used a 2 stage bootstrap to simplify thing for the operator/user: the small bootstrap program loaded a larger more powerful bootstrap program, which then loaded the OS. This is not necessary with the bootstrap program in ROM, the large bootstrap program would be the one in ROM.
Stellan Skarsgård plays Bootstrap Bill Turner.