Headlights Tail and Brake Lights
Ford Contour
Dodge Dakota
Jeep Grand Cherokee Limited

What might be the problem if high beams do not work when switching from low to high low stay on this is a 98 ford contour?

323334

Top Answer
User Avatar
Wiki User
2010-09-10 00:13:02
2010-09-10 00:13:02

Switch? Part of the multi-function switch perhaps?

Do they not work at all? Because you might even need to get your lights adjusted. If they are too low to the ground, it might make the appearance that they aren't on.

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

might be the software problem or on/off switch fault

User Avatar

When facing a problem might be a good time!When facing a problem might be a good time!When facing a problem might be a good time!When facing a problem might be a good time!

User Avatar

Alloy beams can be designed to be :stifferstrongerlighterless apt to corrodebetter in fire exposure

User Avatar

An advantage of packet switching is that a large amount of data can be sent at one time over the network. A big disadvantage of packet switching is the during the data transfer some of the files might get lost in the transfer.

User Avatar

It might be because you need to charge it. I got a camera before and it kept switching off because it wasn't a very good make.

User Avatar

Contour lines refer to the elevation of a line as it runs through a mapped area. For instance a 1,000ft. contour line might meander through an open field or wrap completely around a hill. On any map the "Contour Interval" is indicated somewhere as 25FT or 50ft. or 100ft. meaning that it will be this distance vertically between lines of the same altitude. In flat lands it may be a long distance between contour lines but on a steep slope they might be crowded close together.

User Avatar

I am not sure on a ford but i had about the same problem on a GM car i had and it was the turn signal switch i replaced it and all the brake lights worked fine you might try that

User Avatar

The Inertia Switch Reset button on a 95 Ford Contour is located on the drivers side right behind the hood release. You might have to remove the plastic cover.

User Avatar

That really all depends on where that farmer lives, what terrain he/she has to farm off, and the costs of contour plowing versus terracing. Some areas are not suitable for crop farming no matter what the options are, so the answer to that could be neither contour plowing nor terracing.

User Avatar

There is no problem , although the PP might be low

User Avatar

IT PROBABLY Has dehydrationit might have an inflammitory

User Avatar

if your pig has a digestive problem it might have diahrea or it might throw up.

User Avatar

there might be a problem with your computer. it might not be able to process it. or an account problem

User Avatar

Just means it is an easy task. One might be asked if he can do a certain task, and that person feels he can do that task with no problem might say, "It's a piece of cake, no problem!"Just means it is an easy task. One might be asked if he can do a certain task, and that person feels he can do that task with no problem might say, "It's a piece of cake, no problem!"Just means it is an easy task. One might be asked if he can do a certain task, and that person feels he can do that task with no problem might say, "It's a piece of cake, no problem!"Just means it is an easy task. One might be asked if he can do a certain task, and that person feels he can do that task with no problem might say, "It's a piece of cake, no problem!"Just means it is an easy task. One might be asked if he can do a certain task, and that person feels he can do that task with no problem might say, "It's a piece of cake, no problem!"Just means it is an easy task. One might be asked if he can do a certain task, and that person feels he can do that task with no problem might say, "It's a piece of cake, no problem!"

User Avatar

dimmer switch wore out or you might just have running lights.

User Avatar

Comprehensive coverage is usually good enough for a 1996 contour for a teenage boy. Since he is a teenager, however, you might want to increase the coverage on collisions, a common accident.

User Avatar

I'm not sure what you mean by 'the amount of light', or how you might plan to 'combine' several beams. When more flashlights shine on a surface, the intensity of illumination on the surface increases.

User Avatar

Contour lines are used to indicate elevation, and are most commonly used on topographical maps. On a topographical map, each contour line indicates a particular elevation, the value of which is determined by a scale indicated on the map. Each contour line might, for example, indicate a rise of 20 feet. The closer the contour lines are to one another, the steeper the slope, since the rise in feet remains constant. Ultimately, as in the case of a nearly vertical cliff, the contour lines can become so closely packed together that they appear as a solid band.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.