It is the 100th Anniversary Edition for Remington's making of the 870 pump shotgun. It runs for around $1200 and is a limited edition item. The Premier Dealer Wingmaster also has engravings on each side and a gold trigger. It has semi-fancy claro walnut stock and forearm.
Bottom of receiver in front of trigger
yes
To remove: Open action, press trigger rearward and pull bolt entirely from receiver. To install: Insert bolt in receiver, push bolt over plunger in bottom of receiver, pull trigger and complete forward travel of bolt; then rotate bolt handle downward to lock.
Type your answer here... how do I adjust the trigger on Remington 799
The serial number is located on the left side of the receiver, towards the rear, just above the trigger.
Disassemble to do what? To remove the trigger group you need to push out the two pins in the receiver to remove the trigger group. To remove the bolt you need to take the barrel off which requires an armorers barrel wrench.
Timney makes a great aftermarket trigger for the Remington model 700,that will fit your Remington model 722 rifle.
The 870 Remington shotgun used to be a popular candidate for a "release" trigger.
http://remingtonsociety.com/rsa/questions/barrelcodes
To remove the bolt on a Remington 581, push the safety lever forward (towards muzzle). This will put pressure on a plunger located down in the trigger assembly. Attached to this plunger is a pin that protrudes up and keeps the bolt in the receiver. Pushing the safety forwards depresses the plunger which pulls the pin down, and allows the bolt to be slid free of the receiver.
There is no trigger pull for an R700, since it is an imaginary firearm in the video game Call of Duty. It is based on the Remington 700 rifle. The trigger for an actual Remington may be adjusted between 6 and 2.5 lbs.
fingers on the trigger