Fuel Filters
Chevy Trucks and SUVs
Chevy S-10

What parts are needed to add a second fuel tank to a 1984 Chevy K1500 4x4 fleet side with a body that is modified to handle a second tank but no other parts?

91011

Top Answer
User Avatar
Wiki User
2006-11-14 22:03:03
2006-11-14 22:03:03

you will need the tank, and the mounting straps ( the frame and body should have a spot already there for it), the filler hose, clamps, and the fuel door which i assume is already on the vehicle. If you get one from a wrecked vehicle in the junkyard you can just remove all the parts yourself. Hooking up the fuel lines is going to be the worst part, the vehicle will need an external fuel pump and an electric switching valve and a wye connector to hook it up to the existing lines, once again you can remove all of this and see how it goes together if you pull it yourself at the junk yard. it would be simpler to just fill up more often,there are too many parts to list,it is not a feesible modification

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

How do you replace the outside door handle on a 1996 Chevy Tahoe?

User Avatar

On google images type "door handle diagram Chevy C1500"

User Avatar

How do I take off the handle to put a new one on a chevy colorado 2005

User Avatar

Remove the inside door panel of your 1987 Chevy. Remove the linkage from the door handle. Remove the door handle retaining bolts. The door handle will come off.

User Avatar

how do you install spring on interior door handle of a 98 chevy pickup

User Avatar

how much does it cost to fix a door handle to a 2007 chevy colbalt Ls the inside cables inside handle and out side door handle

User Avatar

with the door handle !!!!

User Avatar

Remove the inside door panel from your 1984 Chevy Caprice. Remove the door handle linkage. Remove the door handle retaining bolts. Reverse the process to install the new exterior door handle.

User Avatar

Need to know inside or outside door handle.

User Avatar

Remove the inside door panel of your 1994 Chevy Lumina. Remove the door handle linkage. Remove the door handle retaining bolts. Reverse the process to install the new door handle.

User Avatar

That's what I am asking you. How do you replace a parking brake handle on an S-10 1996 Chevy Blazer?

User Avatar

how do I replace the inside door handle on a 1998 chevy cheyenne?

User Avatar

the handle is located inside the trunk near the lock mechanism

User Avatar

No, it would not be able to handle engine braking.

User Avatar

The 1972 Chevy 350 has about 270 horsepower stock. This engine can be modified to put out up to about 800 horsepower.

User Avatar

The Chevy Crate engine is an engine that is custom built. They usually have more power and are made from the original motor but bored out and modified.

User Avatar

What Chevy Classic? Way more info needed to answer this.

User Avatar

go to autozone,buy a handle remover/install tool.very simple and direct.

User Avatar

Are you asking about the shift lever on a column shift car or the console shift handle?

User Avatar

Through the hole that the door handle comes through you can feel a screw. Remove the screw and the handle should come off.

User Avatar

Yes, you can change the shifter handle. Remove the hairpin clip at the front side of the handle and lift the handle from the metal pipe.

User Avatar

yes, but it wont handle the torque very long.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.