Replace the missing part.
The Microscope should be carried under the base,( the bottom) of the microscope, and by the 'neck' of the microscope.hope that helps yaits acctually arm
definition of part of typical microscope
An inclination joint of a microscope is where the arm of the microscope connects to the base of the microscope. Many microscopes have a pin to hold these to objects together. If the microscope is equipped with the pin you can place one hand on the base and with the other hand you can grab the arm and rotate it back and forth. The inclination joint allows the microscope to tilt back for more comfortable viewing. Please note, there is no way to contain liquid specimens if you tilt your microscope back the liquid will spill to the ground or all over.midfielder_francis@yahoo.com
The element of an experiment that doesn't contain the variable is called the "control"
Because a bicycle is built thing, built by humans. It's not born from another bicycle, it's not harvested from a bicycle tree / bush /plant. Humans thought them out and humans made them, and they're complicated enough to be called a system.
The Microscope should be carried under the base,( the bottom) of the microscope, and by the 'neck' of the microscope.hope that helps yaits acctually arm
arm
arm
What part of this task I should have done differently?
The Microscope should be carried under the base,( the bottom) of the microscope, and by the 'neck' of the microscope. The neck is actually called the arm if you want the accurate term for it. So, yes, it should be carried by the base and the arm, or 'neck', of the microscope. xD
there are two parts to answer your question. firstly, the arm of the microscope, and then lift up the microscope and place your hand under the microscope and grab the base. in short there is the arm and the base.
Fine Adjustment Knob
The part of the microscope that you look into is called the eyepiece.
Supports upper part of the microscope
the widest part
the arm
holder