HIGH SIDE....YOUR VALVUE TO PUT IN FRE. SHOULD BE DONE ON THE LOW SIDE
Your Answer
Related Questions
When should the timing belts be changed on a 2001 Mitsubishi galant?
When should the timing belts be changed on a 2001 Mitsubishi, Galant?
Where is the voltage regulator on a 2001 Mitsubishi galant?
it is somewhere in the car.If you purchase a Haynes manual for the 2001 Mitsubishi Galant it should give you an exact location.Hope this helps
Where is the fuel filter on a 1999 Mitsubishi Galant V6?
should be mounted on fire wall,passenger side, REMEMBER TO RELIEVE FUEL PRESSURE FIRST !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Where is the fuse for speedometer Mitsubishi galant?
The fuse for the speedometer of a Mitsubishi galant is located on the side of the dashboard on the driver's side. Simply unscrew the latch and the fuse should be located on the back.
What is the lifespan of a timing belt on a Mitsubishi galant 04?
Mitsubishi says every 60,000 miles it should be replaced.
When should you change a timing belt on a 2003 Mitsubishi galant?
when it doesnt work
When should you replace the cam belt in a 97 Mitsubishi Galant?
according to Mitsubishi service manual on my car which is a 2001 4cil galant is every 60000 miles, yours shoul be around the same ..
How many quarts of oil does a 2001 Mitsubishi Galant take?
The total amount of oil it takes to fill the canister on a 2001 Mitsubishi Galant is 4.5 quarts. This oil should be 5W20 or 10W30.
Should the engine shift in a 2000 Mitsubishi Galant?
nope the transmission shifts not the engine
what should be the price for mitsubishi galant-2003model to buy?
the price of a mitsubishi glant-2003 model ranges from $1700 to $6000
Do you need upstream or downstream oxygen sensor for a 2000 Mitsubishi Galant?
It should be equipped with both.
Where can one purchase a 2000 Mitsubishi Galant?
Mitsubishi dealerships are the best places to find a Mitsubishi Galant. If one is looking for the 2000 model specifically then one should call ahead to see if they have one available. Another excellent place to look would be in the local newspapers.
Can you use 15-40 oil in a 2004 Mitsubishi galant 6 cylinder?
Can you? Yes. Should you? NO! Use exactly what Mitsubishi recommends and that is not 15w40.
How much should it cost to change an oil pan on a 1998 Mitsubishi Galant?
1 billion dollars
Where is the starter relay located on a 2004 Mitsubishi Galant?
Follow the + battery cable it should connect to relay
What is the emission control system warranty on 2004 Mitsubishi endeavor?
Try here: http://consumerguideauto.howstuffworks.com/2004-mitsubishi-galant-3.htm Should be the same.
Where is the fuel filter on a 1989 Mitsubishi galant?
It should be located on the passenger's side mounted to the firewall,in an upright position.
What is the output voltage of an alternator under load on a 2000 Mitsubishi galant?
Should be around 13.5-15.5 volts.
How do you disconnect electric Ariel on Mitsubishi Galant?
If you are referring to an electric antenna, there should be a snap-connector to the motor assembly-just remove it.
What should be the tire pressure in Mitsubishi lancer 2002?
The tire pressure on a 2002 Mitsubishi Lancer should be between 30 and 35 PSI. This varies based on the size and type of tire.
Where is the egr valve located on a 2005 Mitsubishi galant?
The EGR valve, on your 2005 Mitsubishi, is located beneath the air cleaner. Remove the air cleaner housing. The valve should be visible and labeled.
What is the average cost for a radiator for a Mitsubishi Galant?
They range alot, you can probably get one for 100-200 I gave a link below that should help you out
What type of oil is recommended for a Mitsubishi Galant twin turbo VR4?
look in the owners manual or right under the hood it should tell you
How do you cure hydraulic lifter tapping?
I have a mitsubishi galant 2003 and the hydraulic lifters are tapping. It comes and goes. Should these be replaced? Have the lifters adjusted.
How do you Change spark plugs for 2005 Mitsubishi galant V6?
You must remove the entire intake manifold for you to have access on the three spark plugs located underneath it. it is advisable that a qualified Mitsubishi technician should do this.
