answersLogoWhite

Top Answer
User Avatar
Wiki User
Answered
2010-11-23 23:47:18
2010-11-23 23:47:18

1954 GMC General Fire Engine with a 630 Cab had a 503 cubic inch straight 6 cylinder gasoline engine.

123
๐Ÿฆƒ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


There is no definitive answer. A typical engine can be any where from 10-30+ tons depending on things such as the size of the truck, the amount of water, etc.


The max engine size is 575 cubic inches


Need more info like> year make and engine size. That would really help. YOU will need to ask your question again with that info. THANK YOU.


Depends on you truck, engine size, bed size.......and related details.


The size of the engine in a truck or bus in cubic centimeters varies widely even within the same make and model. Generally, the larger the vehicle the higher the cubic centimeters.


weight of a fire truck depends on the size and cinfiguration of the truck brushpumpers(flat bed 4x4) will obviously not weigh same as a tanker we have a tanker/ engine that can pump 400 gallons a minute, and carries 3000 gallons of water this truck loaded weighs about 56000 pounds we have an engine that carries 1200 gallons of water and rescue equipment this truck only weighs about 28000 pounds a brushpumper with 300 gallons would weigh about 8000 pounds a rescue squad depends on size of truck and equipment carried on it a ladder truck is a different weight again hope this helps a little there are all types and sizes of fire trucks


It depends on the size of the truck and size of the engine. I have a 5.0L V8 Ext. Cab with a 25 gallon tank.


Mazda named their truck models by engine size, so a B2300 is a 2.3 liter engine.


The emissions sticker under the hood lists the engine size.


fuel tank capacity depends only on what make and size the truck is. the trucks only have fire and emergency equipment added to a truck that is bought from the manufacturer


Varies by type of truck, e.g., pumper, tender, tanker, hood-and-ladder, brush truck, etc.


It varies greatly. Depends on engine size, and if the truck has a tow package.


That depends on the size and materials of the fire truck. Some firetrucks hold as much as 3000 gallons of water and can weigh 50,000 pounds or more.



to know which manifold fits, you need to know what engine is in the truck


Need to know what year it is, engine size


235 Cubic Inch Inline 6.


2.8.engine size from the truck now will a 305 egine work in place of the 2.8



If both are the same size truck ( ie 1500 ), have the same engine, and the same drive ( 2wd or 4wd ), then it should.If both are the same size truck ( ie 1500 ), have the same engine, and the same drive ( 2wd or 4wd ), then it should.


Depends on the size and type. Some don't carry any at all, and must be fed from a hydrant or water tanker truck.


No, the fire extinguisher in our truck was mound sideways. The one in my kitchen lays down to and it is a full size industrial extinguisher.


Some parts on a 1991 Nissan truck are compatible with a 1994 Pathfinder. The alternator, battery, and other engine parts are compatible if they are the same engine size.


The average box truck miles per gallon is dependent upon the size of the box truck, the size of the engine, and the driving conditions. Most box trucks will get around 10 miles per gallon.


There is no direct relationship between the number of cylinders in an engine and the size of its fuel tank!



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.