The front hub takes a 35mm deep socket. (It is not necessary to remove the hub to change the rotor.)
it is a 29 mm hub nut socket
32mm
T-55 Torx Socket (DO NOT USE AN ALLEN WRENCH) - To remove the 3 bolts that secure hub assemble to steering knuckle. 1 -3/16 deep socket - To remove axle spindle nut.
The hub bolts use a 14mm twelve point socket.
36mm
You will need a 35 mm socket.
35mm
I've read that it's 36mm.
it is a 22m socket
36 mm will fit the axle hub nut.
I think that is a 1 and 1/4 socket.