2.25 inch
If its just the Flex pipe replacement it should not cost more than $120 with tax. I recently had mine replaced. -Gokul
The 1994 -1996 Toyota Camry has a flexible joint inline with the Rear Catalytic Converter. (Yes two converters!) The Flex joint develops a leak and then the vehicle sounds like a tank driving down the road. The Flex joint is welded onto the pipe so it is not replaceable. Fortunately the cost for the entire pipe with the converter is very reasonably priced! Replacing the entire Converter pipe will have the vehicle back on the road in very little time.
An exhaust flex pipe is made of layers of woven stainless steel.
You can use regular exhaust pipe providing it fits and you can bend it into the location.
You can get a replacement part from RockAuto for about $65 and have it locally installed for under $100.
A/F sensor are located in each exhaust manifold, O2 sensor After catalytic converter on exhaust pipe
If you do it by yourself, it's about $50-100. If you ask your shop to do it for you it's about $200 and more.
You need a welder the flex pipe part and a saw and a car lift.
No you don't. They can cut the pipe and weld the flex pipe into place...otherwise it will get VERY costly
It's cheapest to buy a universal pipe and weld it on yourself. The universal flex pipe part is Walker 42216. It goes for $25-$30. If you bring the pipe to a shop, the shop should charge you around $50-$80+tax in labor to remove the old pipe and weld the new flex pipe in.
Yes, there is..
A car that has a bad exhaust flex pipe will not pass inspection in any state that requires it. The pipe will need to be fixed before the car is inspected or it will fail.