answersLogoWhite

0


Top Answer
User Avatar
Wiki User
Answered 2006-08-23 11:27:44

If This Is For Say A House Or A Distrubition Center, I Would Use 000 Which Will Handle Around 240 Amps With No Problem. I`m Sure This Will Handle It. At Anyone Time You Would Or Should Never Have The Loadcenter Maxed Out ( If This Is For A Home ) And If You Fill You Might Or Are Only Running One Item On This Wiring At 250Amp, You Will Have To Install 0000 Cable. Hope This Helps

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0
User Avatar

Your Answer

Loading...

Still have questions?

Related Questions

What is the surge current limit for a 40 A MCB?

A 40A MCB is a circuit breaker. The surge current limit is protected to 250A 8/s0uS. The limitation capability of a circuit breaker is that characteristic whereby a current less then the prospective fault current is allowed to flow under short circuit conditions.


Who was 1983 ama district 5 250a champion?

Eddie Morra jr. 2nd place was Eddie lojack jr.


How do you say patient is in room 250a in spanish?

El paciente está en la habitación dos cientos cincuenta A


If you need to upgrade your home service from 150A to 250A can you run the lines through the attic using a conduit?

The short answer is YES and Don


Who Manufactured JC Higgins 12 gauge shotgun Model 102.25?

It is a Stevens Model 250A, made by them for Sears, using the Sears J.C. Higgins trade name.


Who was D5 hare scramble champion 250a class 1983?

# 1 Edward Morra jr Bike Honda cr125 #2 edward lojak jr Bike Husky 250


What is the distance from grandview Illinois to calumet Illinois?

193 miles taking this route:Take I-55 NORTH to I-80 EAST to INDIANA at EXIT 250A.Take I-80 EAST to Calumet City.


What is the mileage between plainfield In and crete IL?

55 miles taking this route:Take I-55 SOUTH from Plainfield to I-80 EAST to INDIANA at EXIT 250A near Joliet.Take I-80 EAST across to the 394 SOUTH towards DANVILLE. EXIT.Take the 394 SOUTH to Crete. Turn right onto Exchange St, which takes you to Crete.It should take a little bit over an hour.


What is the distance in miles between New York city and St. Louis?

1,060 miles taking this route:Take I-80 WEST, from New York City, to I-55 SOUTH to ST. LOUIS at EXIT 250A, near Joliet, ILLINOIS.Take I-55 SOUTH to St. Louis.


How many miles from denver to eldorado Kansas?

535 miles taking this route:Take I-70 EAST from Denver to I-135 SOUTH to WICHITA at EXIT 250A near Salina, KANSAS.Take I-135 SOUTH to K-254 to EL DORADO at EXIT 11A in the northern outskirts of Wichita.Take K-254 to El Dorado.


What size conduit and wires are needed for 250A service?

Hire an electrician. Do not install your main service yourself. It must meet code, it must follow many regulations to the letter, it must be inspected, and it must be done my a licenced professional. You will not save money by trying to do it yourself, and it is illegal. Chances are your power company will not connect service if it is not installed by a licenced professional.


What is the driving distance between Dallas TX and Vail CO?

975 miles taking this route:Take I-70 EAST from Vail to I-135 SOUTH to WICHITA off EXIT 250A, in Salina, KANSAS.Take I-135 SOUTH to I-35 KANSAS TURNPIKE (toll) SOUTH to OKLAHOMA CITY.Take I-35 SOUTH to I-35E SOUTH to DALLAS; continue on I-35E SOUTH to Dallas.


How many miles from Denver to Wichita?

The distance is straight path from one place to another place. There might be slight difference between the actual distance and the above mentioned distance because of the route chosen.The distance between the above mentioned places is 515.3 miles approximately.


Oil ratio for 1992 yz 250A?

This would depend on what type of oil you will be using for your premix. The oil base stock is either petroleum, semi-synthetic or synthetic oil and is mixed with gas at a ratio ranging from 16:1 (petroleum) to as high as 100:1 (synthetic). I personally ride a 2001 Kawasaki KDX200 that I run Yamalube 2R at 36:1 with no problems. Although synthetics say you can mix them at 100:1 I would not, that seems way too lean to me.


What is the educational background of a US Senator?

The answer to that question is contained in a comprehensive report by the Congressional Research Service, entitled "Membership of the 111th Congress: A Profile", dated September 2009, pp. 3-4. Go to the following URL:http://docs.google.com/gview?a=v&q=cache:KlXu6J7CSc0J:www.senate.gov/CRSReports/crs-publish.cfm%3Fpid%3D%25260BL%29PL%253B%253D%250A+education+background+of+U.S.+senators&hl=en&gl=us&sig=AFQjCNFtcKOS-R_5Tr-y5NPgPL0yWm8Owg


How far is it from Springfield IL to Lansing MI?

418 miles taking this route:Take I-55 NORTH to I-80 EAST to INDIANA at EXIT 250A in Chicagoland (Joliet).Continue on I-80 EAST to Indiana where you will exit at EXIT 16 to continue EAST on I-80, with I-90 and the TOLL ROAD.Continue on I-80/90 EAST on the TOLL ROAD to I-69 to ANGOLA FT. WAYNE and LANSING at EXIT 144. You want to take I-69 NORTH to LANSING.Take I-69 NORTH to LANSING.


Quickest route from peoria Illinois to flint Michigan?

Take I-74 EAST to I-55 NORTH to CHICAGO at EXIT 127.Take I-55 NORTH to I-80 EAST to INDIANA at EXIT 250A.Take I-80 EAST to I-80 EAST/I-90 to TOLL ROAD at EXIT 16 in Indiana.Continue EAST on I-80 and also I-90 on the TOLL ROAD to I-69 to ANGOLA FT. WAYNE and LANSING at EXIT 144. You want I-69 NORTH to LANSING.Take I-69 NORTH to Flint.


What are the application of current transformers?

Current transformers are used to monitor the current flow through larger diameter wires. They are rated in ratio of 1: to the ampacity of the wire they are monitoring. They are used in electrical distribution services over 200 amps. Maximum current produced is 5 amps. eg. A conductor has a maximum capacity of 500A and you want to see how much current is going through the wire at any one time. You have a meter mounted in a control panel with main graduations of 100A, 200A, 300A, 400A and 500A. The same hold true on a distribution service where the CT is connected to the meter base. The specs on the meter says full scale deflection 5 amps. The CT is mounted on the conductor like a do-nut and has a ratio of 1:500. 500A through the conductors induces 5 amps in the CT, full scale deflection of the meter to the 500A position. The current through the CT is in direct porportion to the current through the conductor. 250A through the conductor, induces 2.5 amps in the CT, half deflection of the meter to a position halfway between 200A and 300A, or 250A.


Can you describe the Operation of current transformers?

Current transformers are used to monitor the current flow through larger diameter wires. They are rated in ratio of 1: to the ampacity of the wire they are monitoring. They are used in electrical distribution services over 200 amps. Maximum current produced is 5 amps. eg. A conductor has a maximum capacity of 500A and you want to see how much current is going through the wire at any one time. You have a meter mounted in a control panel with main graduations of 100A, 200A, 300A, 400A and 500A. The same hold true on a distribution service where the CT is connected to the meter base. The specs on the meter says full scale deflection 5 amps. The CT is mounted on the conductor like a do-nut and has a ratio of 1:500. 500A through the conductors induces 5 amps in the CT, full scale deflection of the meter to the 500A position. The current through the CT is in direct porportion to the current through the conductor. 250A through the conductor, induces 2.5 amps in the CT, half deflection of the meter to a position halfway between 200A and 300A, or 250A.


Show route from bloomington il to Hartford ct?

Take I-55 NORTH to I-80 EAST to INDIANA at EXIT 250A.Take I-80 EAST through Illinois, Indiana, Ohio and Pennsylvania to I-287 to MORRISTOWN and MAHWAH at EXIT 43 in New Jersey. You want I-287 NORTH to MAHWAH.Take I-287 NORTH to I-87 NEW YORK STATE THRUWAY (toll) NORTH to ALBANY.Take I-87 NORTH on the New York State Thruway (toll) to I-84 at EXIT 17. Look for I-84 EAST.Take I-84 EAST to Hartford.


How many miles from Detroit to Oklahoma City OK?

1,066 miles taking this route:Take I-94 WEST (towards CHICAGO), from Detroit, to I-80 WEST to IOWA, in INDIANA, near Chicago.Continue on I-80 WEST to I-55 SOUTH to ST. LOUIS off EXIT 250A in Joliet, ILLINOIS.Take I-55 SOUTH to I-270 WEST to KANSAS CITY off EXIT 20.Take I-270 WEST & SOUTH, around ST. LOUIS, to I-44 WEST to TULSA off EXIT 5B in MISSOURI.Take I-44 WEST to OKLAHOMA CITY, via the CREEK TURNPIKEto bypass TULSA, OK.


How far Manhattan Kansas to Dallas Texas?

It is 493 miles according to Google Maps.Or you could stay on the interstates more, and take this route, which, though it is a bit longer, is made easier by staying on the interstatesThis route is 520 miles, and is outlined below:Take K-18 WEST, from Manhattan, to I-70 WEST.Take I-70 WEST to I-135 SOUTH to WICHITA at EXIT 250A.Take I-135 SOUTH to I-235 at EXIT 11B.Take I-235, around WICHITA, to I-35 KANSAS TURNPIKE - SOUTH to OKLAHOMA CITY.Take I-35 SOUTH to I-35E SOUTH to DALLAS, at the split near Denton, TEXAS, and then continue on I-35E SOUTH into Dallas.


How far is it port Arthur from denver co?

1,210 miles taking this route:Take I-70 EAST, from Denver, to I-135 SOUTH to WICHITA at EXIT 250A, near Salina, KANSAS.Take I-135 SOUTH to I-35 KANSAS TURNPIKE (toll) - SOUTH to OKLAHOMA CITY, at the END of I-135 in Wichita.Take I-35 SOUTH to the HARDY TOLL ROAD - SOUTH at EXIT 72B, north of Houston.Take the HARDY TOLL ROAD - SOUTH down to I-610 EAST at the END of the Hardy in Houston.Take I-610 EAST to I-10 EAST to BEAUMONT at EXIT 26A.Take I-10 EAST to SH-73 to PORT ARTHUR at EXIT 828.Take SH-73 EAST to Port Arthur.


What is the driving distance between Colorado Springs Colorado and Tulsa Oklahoma?

682 miles taking this route:Take U.S. 24 EAST to I-70 in Limon. Follow signs.Once you are at JCT I-70, turn right onto I-70 EAST. Take I-70 EAST to I-135 SOUTH to WICHITA at EXIT 250A in Salina, KANSAS.Take I-135 SOUTH to I-35 KANSAS TURNPIKE (toll) via I-235 around Wichita. (EXIT 11B off I-135.)Once you are at I-35 and once you are past the toll booth, follow signs to I-35 SOUTH to OKLAHOMA CITY. Take I-35 SOUTH to OKLAHOMA where I-35 becomes toll-free. Continue on I-35 SOUTH in Oklahoma to U.S. 412 (turnpike) EAST to TULSA.Take U.S. 412 EAST on the CIMARRON TURNPIKE to Tulsa.


What is the distance between seattle wa and ft worth tx?

2,240 miles taking this route:Take I-90 EAST, from Seattle, to I-25 SOUTH to CASPER at EXIT 56B in WYOMING.Take I-25 SOUTH to I-70 EAST to LIMON via E-470 (tollway) EAST to bypass DENVER (EXIT 228 off I-25 in COLORADO to get onto E-470 (tollway) EAST ; EXIT 20 off E-470 to get onto I-70, follow signs to I-70 EAST to LIMON).Take I-70 EAST to I-135 SOUTH to WICHITA at EXIT 250A in Salina, KANSAS.Take I-135 SOUTH to I-35 KANSAS TURNPIKE (toll) SOUTH to OKLAHOMA CITY via I-235 SOUTH (EXIT 11B off I-135) to bypass WICHITA.Take I-35 SOUTH to I-35W SOUTH to FT. WORTH; continue on I-35W SOUTH to Ft. Worth.