0
What size torx do you need to remove the retaining studs on a clio front brake disc?
Towlawrian
t40
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
How do you remove the Acura Integra 94 front brake rotor?
You'll need to remove the wheel, the brake pads and the caliper. Once all of that is out of the way, there are rotor retaining screws that need to be removed, either on the studs, or on the axle itself.
How do you remove rotors on a Isuzu amigo?
For the rear, remove the tire and wheel. Remove the Brake Caliper and Brake pad bracket. Then the rotor should slide off the wheel studs. The front may have to have the spindle retaining nut and cotter pin removed once the brake pad bracket is removed. Be careful to not get dirt in the bearing.
How do you replace front wheel studs on 1962 pontiac catalina?
Remove the brake drum, drive out he damaged studs from the front of the drum, press in the new ones from the back of the drum, reinstall the drum.
Removal of front lug studs on a 94 Acura Integra?
Lug studs on a 1994 Acura Integra is pressed into the hub. To remove the lug studs safely raise and prop the car. Remove the wheel, brake components, and suspension parts from the hub. Press out the old studs.
How do replace studs on 1998 dodge avenger?
The wheel studs are replaced by first removing the tire from the brake. Remove the disk brake pads and caliper if it is the front and remove the brake drum if it is the back. Once you have the brake disk or drum off, simply pound the studs with a heavy hammer and they will pop out the back. if you plan on reusing the studs put the nut on the threads so it is flush with the end and then use hammer as not to ruin threads. Spray WD-40 or heat the brake disk/drum(not the studs) if they are stubborn or rusty.
How do you change the front brake rotor on a 1997 f 150 4X4?
you have to press the wheel studs out of hub after you remove it from the spindle
How do you remove a front brake rotor on a 1997 Chevy k2500?
The complete hub and rotor assembly have to be removed in order to drive out wheel studs to separate the rotor from the hub. So, remove wheel, remove caliper, remove caliper bracket, remove axle retaining nut, remove 4 bolts holding hub assembly to spindle, dissconnect ABS sensor harness, remove hub assembly, remove all wheel studs then separate rotor from hub.
How do you remove the front rotors on a 2007 Acura TL?
Hello, Removing the front rotors on an Acura TL is clockwork. Here is a quick how-to guide: 1. Raise and safely support the vehicle. 2. Remove the front wheels. 3. Remove the brake hose mounting bracket. 4. Remove the brake caliper bracket mounting bolts, and remove the caliper assembly from the knuckle. 5. Remove the rotor retaining screws. 6. Remove the brake rotor by pulling it straight off the wheel mounting studs or if seized in place, remove the stubborn brake rotor by threading in two 8 x 1.25mm bolts, two turns at a time until the brake rotor is released. Good luck with your brake job!
How do you remove a tailgate from a 1995 s 10?
Open the tailgate, remove the retaining cables from the studs, pull out on the passenger side of the tailgate.
How do you take the front wheel hub on a 94 civic so that you can change the studs?
The front wheel hub on a 1994 Honda Civic is connected to the upper control arm and lower. Remove those as well as the axle. Also remove the brake caliper, rotor, and pads. The hub will come off and the studs will then be able to be reached.
Do you have to repack the wheel bearing on a 2004 Jeep Liberty if you replace the brake rotors?
No, you can remove and/or replace the front rotors on your Jeep Liberty without having to repack the wheel bearings. To remove the rotor, remove the brake caliper, and then pull the rotor straight off the wheel studs. If the rotor doesn't budge, then use an air hammer to tap the front face of the rotor adjacent to the wheel studs (the flat area of the rotor directly between the wheel studs). This will knock the rust loose and let the rotor slip off the studs. DO NOT use the air hammer on the braking [shiny] surface of the rotor!
How do you remove a brake rotor on a 2006 Chrysler pacifica?
Remove the wheel, remove the brake caliper and the caliper adapter bracket, pull the rotor off of the wheel studs.
