0
What size wrench is needed to loosen caliper bolts on your 1994 F 150?
Wiki User
∙ 13y ago
For the caliper mount bolts that are removed during a brake pad change, 1/2" is a good fit on my 1996 F250. 13mm will fit but is a little sloppy. Were you asking about the "caliper bracket" instead?
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
What size wrench is needed to loosen the front caliper on your 2005 ford expedition?
Loosen and remove the caliper retaining bolts. Torx T-40 or T-45
What size wrench to loosen caliper bolts on 2006 Volvo S40?
I believe it is a 7mm hex.
What size of wrench is needed to remove 2003 Silverado front caliper bolts?
the caliper bracket bolts use 18 mm wrench on a 03 1/2 ton 4x4
What size wrench to loosen caliper bolts on 2000 Passat?
Should be 10mm or 3/8ths Actually, it turned out to be 7mm Allen wrench.
What kind of wrench is needed to remove the front caliper bolts on a 2001 ford focus?
Metric Allen wrench.
What size wrench is needed to remove caliper bolts on a 2005 Mazda 6?
It will be a 14 or 17 mm wrench.
What size Allen wrench to loosen the rear disc brake caliper bolts on a 2004 jeep grand Cherokee?
7MM
What size wrench is needed to remove the caliper bolts on the front brakes of a 1995 Chevy Suburban?
the caliper bolts require a 3/8" Allen wrench. You can buy these as a socket at just about any parts store.
What size wrench is needed to remove the brake caliper bolts on a 1991 Honda Accord?
use an Allen wrench not a socket or open or box wrench.
What size wrench is needed to remove the caliper bolts on the front brakes of 1979 Chevy blazer?
It should be a 3/8" Allen wrench.
1999 Monte Carlo caliper bolts loosen in what direction?
Bolts on the caliper of a 1999 Monte Carlo will loosen to the left and tighten to the right.
Where are the caliper bolts located on the firebird 1995?
The caliper bolts can be accessed from the rear of the caliper. After removing the tire you can view the recessed brake caliper bolts. You will need a large Allen wrench, as these are Allen head bolts. Consult your auto parts store for the proper size Allen wrench. Common toolbox wrenches will be far too small. I would advise to spray down with some WD-40 the night before. You should also make available a large hammer to hit the wrench and loosen the bolts, as it is an akward position to muscle the bolt free with a short wrench.
