0
Bolts are categorised by their thread size.
The standard socket size for a bolt with a three quarter inch thread is 1 and one eighth inches. Heavy head bolts use a one and a quarter inch socket.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
Will 1999 Chevy three quarter ton rims fit on a 2006 three quarter ton?
If the bolt pattern is the same.
What is the correct size of socket required to remove a 2H nut on a 1¼ stud bolt?
2"
What is 97 jeep wrangler 4.0 head bolt size?
1/2" 12 point. A deep socket will be required
Is the bolt pattern on a 1997 Dodge Intrepid for the water pump 3 or 6 bolts?
There are three bolts. 10mm socket
What is an Allen screw?
An Allen screw is a screw whose head has a hexagonal socket.
1997 Chevy truck bed bolt and nut size?
There are several bolt and nut sizes associated with the 1997 Chevrolet truck bed. The bolt and not sizes range from a half inch to three-quarter inches.
How do you define a bolt?
A bolt is a moveable bar or rod that when slid when into a socket fastens a door, gate, etc. In a bookbinding the three edges of a folded sheet that must be cut so that the leaves can be opened.
How do you turn over an engine by hand on a 2001 Chrysler sebring convertible limited 2.7?
A ratchet and socket on the bolt that holds the crank pulley on.A ratchet and socket on the bolt that holds the crank pulley on.
What standard size socket will fit a 5.5 metric bolt?
A 7/32 socket or wrench will fit on a 5.5mm bolt, but poorly. You risk rounding off the head of the bolt if it's stuck very tight.
What size Allen socket is needed to remove caliper bolt on a 2004 Escape?
What size Allen socket is needed to remove bolt from caliper on 2004 ford escape
What socket size for half inch bolt?
1/2"
What socket is needed to remove 91 cavalier wheel cylinder bolts looks like reversed torx?
Any type of socket can be used to remove a 91' Cavalier wheel cylinder bolt that looks like a reversed torx. However, make sure the socket is a bolt head socket.
