the only thing i can think of would be a puller to remove the inner race from the stub axle, they tend to stick together alot!! AT
I saw this online http://www.endwrench.com/current/Current6/03/WhBearRep.pdf
I have that problem right now. What I did was ascertain through hearing and feel that it was one of the front bearings. As a general rule--you never replace just one bearing. Either the two front or the two rear. Short of actually removing each bearing, this is your only option--unless you want to pay the bucks for a crackerjack mechanic; and if you do take bearings out--you never replace with the same old bearing--always new. Bad wheel bearings usually make noise. Try to listed to where the noise comes from.
That depends on what you mean by easy and on what vehicle (there are several types of wheel bearings and assemblies). For someone with the correct tools, preferably with a repair manual, and a little mechanical experience, it is pretty easy for most vehicles. For someone who can't change a spark plug or a tire, probably not so much.
I have had to do this. This process is generally the same for any car. 1 Take off the wheel with the bad bearing. 2 Remove the caliper 3 Behind the caliper is the end of the axel. Inside of it, you will see a circular shaped object lined with bearings. Just pull it out. You usually have to replace the what I'm pretty sure is called the rase. Basically, this is a metal liner that sits between the bearing and the inside of the axel. This is not easy to get out! I'm sure there is some special tool you can borrow from an automotive store. They usually loan these kinds of things out for free. If you can't get this liner out by yourself, you might consider having a mechanic put new bearings on for you.
Luckily, it isn't pressed in. It's a hub assembly. Just bolts in and out.
Do I need any special tools to replace front wheel bearings on a Saturn 2002 L200?Also what is the procedure for doing so?
more info needed.
The most unusual tool need to replace the front wheel bearings on a 2001 Toyota Sequoia 4WD is a wheel puller. This tool is needed to remove the brake disc from the wheel. It can be rented at a tool rental business or bought at an automotive parts store.
How do you replace the front wheel bearings on a nissan frontier 4x4 1999
how do you replace rear wheel bearings on nissan pulsar
to dissasemble wheel bearings you need a special socket after you remove 4x4 hub this special socket will only fit the front bearing nut .a different size is used on the rear
Wheel bearings? 4X4 ? 4X2?
When you can hear them, usually.
You will need to take the steering knuckle off and press the bearings in and out. OK, so how do I press the bearings in and out? Can it be done at home, or is a specialized tool needed?
special tools are required to do this job.slide hammers impact tools.yhis is not a job for diy!!
Did you ever get anywhere on this thread? I'm looking to replace the front bearings and rotors on my 2000 ZR2.
If it is 4x4, you have to replace the whole hub