Jacklug-wrenchwrenches1"X2" boardC-clampNew Brake PadsAnswerIts a 7mm Allen wrench to remove the two caliper pins. AnswerIf you are also doing the rears (disc only) you will need the special Ford caliper tool, turns and pushes the plunger at the same time. if you put a C clamp on the rears you will destroy the caliper, and they arent cheap ;)
It's a 7
what tools are needed
You need a 7mm Allen key.
Changing your own front brake pads can save hundreds of dollars. Tools needed for the job are a jack, the brake pads, lug wrench, socket wrench, and brake fluid.
How do you change front brake hose on a 1997 lincoln
Generally you will need basic metric wrenches, and metric sockets and possibly a torx head socket on some models. Also jackstands and hydraulic jack.
how to change front brake pads on a 2003 neon
Change front brake rotors on a 1998 Hyundai Accent?
I believe that is 3/8 Allen
how to change front brake pads on a 1994 lexus es300
basic tools are all that are needed its a simple job. They are disc type brakes.If you can do the front, then you can do the rear.
You will need a hoist, a socket wrench set and a torque wrench. You will also need the brake pads, brake fluid and brake grease.?æ
how do you change the front brake rotor on a 2001 highlander?
Can someone help me with the same promble.. how do you change the front brake pads and what tools do you need to do the job
How do you change the front and rear brake pads on a 2000 Honda Civic Si?
How do I change the front break pads on a vauxhall Astra
how do you change front brake pads on a 2001 kia optima
How do you change brake pads on a 2002 Nissan Sentra? How do you change brake pads on a 2002 Nissan Sentra? How do you change brake pads on a 2002 Nissan Sentra?
To change your brake pads check out the following website for step by step instructions. http://www.oqcgp.com/forum/kb.php?mode=article&k=14 Hope this helps. "G"
change fronadst brake
The contour had MacPherson struts in the front.
Lug wrench, metric socket set, "C" clamp
I think the calipers are attached with 14 mm bolts.