Liquid nails would work well.
ANS 2
The use of Liquid Nails on ceramic tile is time wasting and very expensive. The best adhesive for this is thinset mortar laid with a castellated trowel.
from imogen_lourdes <3<3<3xxx p.s the best
Try rubbing the stain off with mineral spirits or paint thinner first. If that doesn't work, you may have to try a chemical stripper that removes the type of finish you applied to your wood floors. Generally, they won't damage the glazing on ceramic tiles, but they may strip color from your grout so be careful.
The content of C3S in cement depends on type of cement.If it is Ordinary Portland Cement, then the C3S content is 95%; andif it is Pozzolona Portland Cement, c3s is 65% - 70%
An adhesive is just another word or a type of glue- it sticks one thing to another. It can occur in the natural world, or in human society, be synthetically produced.
No, glue sticks are a type of thermal adhesive.
There are many kinds of tile adhesive and you don't specify which . However most are basically of two kinds - Very fine Portland cement with additives, used mainly for stone or ceramic floor tiles and a type of modified latex for ceramic wall tiles.
Not directly as the ceramic tiles will soon show through the vinyl flooring. If the ceramics are laid on a wooden floor, you must take up the tiles and overboard with 6mm plywood. If the tiles are on a concrete floor, you can leave them down and lay a latex screed on top to provide you with a smooth floor for your vinyl
No unless it is a cement substrate. Wood sub floors are not strong enough. You need to have a mud bed poured or put some type of cement board down.
Just go to your local hardware store and tell them your problem and they'll select a good bonding material for you. ANS 2 - Ceramic tile thinset cement, with latex additive.
Ceramic. Ceramic.
It depends on the type of ceramic adhesive. Many of them can be taken off tile with lacquer thinner on a rag.
form_title= Floor Tile Adhesive form_header= Keep the floor tile looking nice with an adhesive. Do you need to remove current flooring?*= () Yes () No What is the square footage of the area?*= _ [50] What type of tile are you installing?*= _ [50]
I am not an expert but from experience selling tiles the following are guidelines: 1. The type of surface determines how much cement to use 2.The quality of cement will also affect ratio 3.The area to be tiled e.g. wall or floor determines the quantity on average 2-3 squares meters will require one 20Kg tile adhesive
Loctite PL Premium is a contractors adhesive that is 3 times as strong as mastic and ideal for this kind of application
Thin set cement.
Floor tiles are tiles made for use on a floor. They can be made of ceramic, terra-cotta, linoleum, vinyl and other materials. Ceramic tiles are a type of tile made from hardened materials (like clay). People put ceramic tiles everywhere - around the bathroom, kitchen, pools, etc.
Neither use adhesive