What type of cable is used to connect the Ethernet interfaces on a host PC to the Ethernet interfaces on switch?
An ETHERNET CABLE.
Ethernet Cross over cable
A straight-through ethernet cable.
The ethernet cable, ethernet switch or WiFi.
Connect one end of the cable into your computer and the other end into the Ethernet hub or switch.
What type of cable is used to connect the Ethernet interface on a switch to the Ethernet interface on a router?
To the switch the router is just another host, so it connects with a straight Cat 5 or Cat 6 cable.
No. You need to connect the ethernet cable to a modem or router. You can disconnect the PC ethernet cable from the modem and connect an ethernet cable from the Xbox 360 to the modem until you purchase a router.
You need a crossover cable to connect two routers via normal Ethernet interfaces.
The Ethernet port is used to connect a computer to a connectivity device such as a modem, router, switch,etc. Does so via an ethernet cable.
This is usually done through a Ethernet Cord. Usually cat5/5e/6 cable with an RJ-45 end. To connect the router and switch, use straight through cable.
You can use a switch to connect different pieces of equipment. For example, a standard ADSL router only has a port for a single Ethernet cable. If you want to connect 2 or more computers to the Internet, you can use a switch. In this case, the ADSL router and each computer connect to the switch, via a standard Ethernet cable. If you don't have an Internet connection, you can still set up a home… Read More
A straight cable is used to connect a PC to a hub, switch, or router.
Straight through ethernet cable (CAT 5/5e/6)
Your Ethernet cable should have an RJ-45 modular connector on each end of the cable. Connect one plug in the RJ-45 slot/connector in the back of the desktop unit, and connect the other end to a switch, hub, or router.
How do I connect to the Internet when the wireless switch on my hp laptop is broken Is there any other way to connect to the Internet?
You'd have to use an ethernet cable.
you use an ethernet cable to connect.
With an ethernet cable. (male)
"An ethernet cable splitter allows you to connect two computers to one ethernet connection. Once you have your splitter made, you plug it into both computers just as you would with a normal ethernet cable."
You are supposed to connect an ethernet cable from the modem to whatever device that needs an online connection and if you have 2 or more items connect the router to the modem with an ethernet cable and then connect the devices to the router with ethernet cables
You would connect them with ethernet cables and 1 or more switches. If you require more than 1 switch, you need to connect the two switches with an ethernet cable too.
It all depends on the interface of the switch but switches commonly use ethernet cable, most commonly Category 5 or 6 (CAT5 or CAT6).
You need a Fibre Optic Converter or FOC, this converts the fibre link to ethernet
I don't quite understand what you mean. If you mean to create a network you will need a switch and 4 ethernet cables. then you can connect one ethernet cable to the router and the other end into the switch then from there connect the other three into the switch and into the back of the computers. they will be able to see each other as part of a network.
Usually older Ethernet switches needed to be connected using a crossover cable. Now, most modern switches have auto-crossover feature that lets you use a straight Ethernet cable. You could also connect two computers using a crossover cable, but like with switches, most Ethernet interfaces on computers also support auto-crossover.
The Ethernet cable should generally not be plugged into your computer, but rather directly into an Ethernet router.
they look they same size but the ethernet cable is larger and it would not work
It depends on the type of routers you have. Many new networking devices automaticaly detect cable types and switch modes to communicate. As a standard answer though, a router is a dte, similar to a PC, and to connect two like devices would require a CAT 5 crossover cable.
In the Ethernet port at the back of the PS3
the straight cable can connect switch with router
You can use any cat 5 ethernet cable to connect the xbox 360 to the router.
The ethernet cable is used to connect your console to the internet (wired). You need this to actually get a network connect on the Xbox 360.
Do you have to connect your router to your PC via ethernet cable or can you connect via wifi and do you have to connect your router to your hub?
You do not have to connect your router to your PC via ethernet cable, you can instead connect via wi-fi and your router must be connected to your hub.
You have to have a Ethernet or Wireless card in your PC, then you can connect via Ethernet cable or wireless.
Connect them with an ethernet crossover cable.
An ethernet cable.
Connection is made with an ethernet cable
you go and get an ethernet cable, or wifi
A crossover cable.
Connect a CAT5 ethernet cable that runs from the Wii to an available Ethernet jack or to your home router and enter your IP Address into the Wii's settings.
If you have a router the ethernet cable connects to it. If you have another item like a PC connected to a modem you could disconnect the ethernet cable from it and plug in the PS3 until you purchase a router.
To connect a PC to a switch you should use a straight through UTP cable.
Purchase a router and an ethernet cable and connect the router to the cable modem and then connect everything to the router if you get the wireless router then you connect wired devices to the back of the wireless router and you can go WiFi to connect the PS3 or connect it with ethernet cables for a better connection.
Wireless internet Cable+ Ethernet cord. Cable+
Use router and ethernet cable for a cable or DSL modem
cat 5 Ethernet cable
USB or Ethernet cable (crossover)
How do I connect a wired scientific atlanta 2203c cable modem with only a usb port to a wireless router with only Ethernet ports?
connect the cable modem to PC using the usb port, leaving you the ethernet porton on the cable modem to connect to the wireless router.
Just plug in a DSL or Cable ethernet cable in the back of a PS3 and let the PS3 auto connect from settings menu
You would need what is called a crossover cable. It is basically an ethernet cable with 2 of the wires swapped on one end. This swapping is usually done inside a switch but has to be physically done on the cable if you are trying to connect direct. You also have the option of using special USB cables to connect computers directly.
How do you use your wired broadband connection to connect your wireless laptop to the internet when there is no wireless network available?
You have two basic options. 1.You can connect your laptop to your cable, fibre optic, or DSL modem or Ethernet port using an Ethernet cord. 2. You can connect your cable, fibre optic, or DSL modem or Ethernet port to a wireless router using a Ethernet cable. You then connect your laptop using wireless to your wireless router.