10 40w engine oil!
depending on the size of the pergeot engine, and the type of saxo its going into (more detail)
15w40 so says the manual
To add engine oil to a Citroën Saxo VTR, open the hood and locate the oil filler cap, which is usually marked with an oil can symbol. Remove the cap and use a funnel to pour in the appropriate type and amount of oil as specified in the owner's manual. After adding oil, replace the cap securely and check the dipstick to ensure the oil level is within the recommended range. Always check for leaks and ensure the engine is off and cool before performing this task.
For a Citroën Saxo 1.1i V-reg, it is generally recommended to use 10W-40 semi-synthetic engine oil. This viscosity provides good protection and performance across a range of temperatures. Always check the owner's manual for specific recommendations and ensure the oil meets the necessary specifications for your vehicle.
Hi your saxo is a front wheel drive,the engine and gearbox use the same oil so just use your engine dipstick. Hope this helps. you need 2 litres of oil for the gearbox no dip settings so a drain and refill is the most accurate
Change password for the start engine for citroen saxo?
of course it will, vice versa just like a saxo VTS/VTR engine will fit in a forte or desire
Saxo 1.4 Ltr Engine code KFW (TU3P/L4) Grade 15W/40 semi synthetic Quantity including filter 3.5 Ltrs
how to top up gearbox oil in a petrol saxo 1.4 x reg
The CDZ engine is the 1.0 with 50 hp, while the HDZ is the 1.1 with 60 hp.
Depends on several factors. Engine type load conditions Type of oil used. Without oil your engine would melt.
On a Citroën Saxo Mk1, the engine code is typically located on a metal plate or sticker attached to the engine block itself. You can usually find it on the front or side of the engine, near the timing cover or the oil filter. Additionally, the engine code may also be stamped directly onto the engine block. Checking the owner's manual can provide specific details on its exact location for your model.