hi this is peter i have a 2001 chevy blazer and how do i change the encoder motor on the transfer case? thanks
Dextron II
11.2 quarts
No they do not. There is a seal between the transfur case and transmission to stop the transfur of fluid from 1 to the other.
Remove all wires attached to the transfer case. Remove the driveshafts. Drain the fluid out of the transfer case. Place a transmission jack under the transfer case. Unbolt the transfer case from the transmission. Unbolt the crossmember the transfer case rests on.
A 1996 Chevy Blazer Does have a transfer case IF it is equipped with 4 wheel drive
2.5 Quarts, this is also for almost every chevrolet.
Motorcraft MERCON automatic transmission fluid
That is a must, It has to have fluid in it are it will burn up.
transmission- 80-90w gear oil transfer case - atf tranny fluid
Every new process transfer case I have ever worked on took 80\90, which you can identify by smell. My '84 Jimmy with a 700R4 trans uses ATF in the transfer case. Easy enough to tell when you open the fill plug, or if changing the fluid, you'll see when draining.
The automatic transmission fluid temperature sensor on a 1997 Chevy Blazer S10 is located on top of the transfer case. It is in the engine compartment.