The automatic transmission fluid temperature sensor on a 1997 Chevy Blazer S10 is located on top of the transfer case. It is in the engine compartment.
dumb question, you put the transmission fluid is the hole the dip stick is in, its like this on all cars that i know of
Will a 1997 blazer what work on a 1999 blazer????? If your talking engine, transmission, or running gear than yes. It is all the same.
Yes. They both use the 4L60E transmission.
Dexron III is the correct fluid for this application
No it will not even get close. Chevy REDESIGNED the engines and transmission in late 1999.
yes it will
the 1996 and 1997 are the same and would not work in your 2000 straight from GM
how to replace a heater core in a 1997 Chevy blazer
It is on the drivers side of the transmission
You should use Dexron III Automatic Transmission Fluid or GM Auto-Trak II fluid which are recommended by the manufacturer. All Chevy Blazers through 1998 will hold 1.25qts.
What is best brand atf for 1997 silverado pu
Mercon works fine.
The 4.3 liter V6 engine in a 1997 Chevy Blazer has a timing CHAIN
No it will not fit CORRECTLY. You will need to get a 96 or 97 4L60E transmission so it will fit and everything will BOLT UP.
Assuming you have an automatic transmission the dipstick is located under the hood on the passenger side in back of the engine, close to the firewall.
Remove the transmission pan.
Assuming this is an automatic transmission, pull the dipstick out and read it, it will tell you the proper ATF to use.
A 1997 Chevrolet Suburban will hold approximately 4 quarts of transmission fluid. This fluid can be purchased at any auto parts store such as NAPA.
The 1997 version has the 4T60e transmission
a 4 door 97 blazer front how do i do it