Auto Parts and Repairs
Plural Nouns
Similarities Between

What types of tools do you need to change the engine torque rod on your '93 Accord EX?

Top Answer
User Avatar
Wiki User
Answered 2004-07-18 10:47:41

Hey Mark==I don't know what the torque rod is. Maybe a better description would help . Good luck JOe

User Avatar

Your Answer

Still Have Questions?

Related Questions

How long does it take to change brake pads on a Honda Accord?

Changing the brake pads on a Honda Accord is relatively simple. With a few simple tools, one can replace the pads in about one hour.

What tools are needed to change fuel filter on a 1989 Honda Accord?

oil filter toolYou would need a oil filter wrench, a jack that's all you need to change the filter.

How do you change rear struts on a 99 accord?

rear seat and dash panel mus be removed to access the bolts sould be a no brainer from there on wiwth the right tools

How does turret lathe differ from engine lathe?

A turret lathe has a toolholding turret in place of a tailstock. The tools in the turret can be used to perform multiple cutting operations without the need to change tools, while when operating a conventional engine lathe, changing tools is necessary.

Do you need a torque wrench when replacing pads and rotors?

You do not need a torque wrench when replacing brake pads and rotors. Some of the tools needed to change the rotors and pads are the c-clamp, sockets, wrench, grease, and brake cleaner.

How do you change or how involved is changing the alt belt on a 1992 Honda accord 2.2l?

Easy with the right tools. You can ghetto do it with a set of metric wrenches and small hands, though.

Is it hard to change the torque converter in a 1994 Deville Concourse Should this be left to a shop?

If you have to ask this question it would probably be best to leave it to a shop. It's not hard just hard work. It's bolted to the engine flywheel just like a cluth plate. Do you have the tools and all to remove the transmission and possibly the engine to get to the convertor?

How do you get cm in Microsoft office?

Change the measurement units under Tools and options.Change the measurement units under Tools and options.Change the measurement units under Tools and options.Change the measurement units under Tools and options.Change the measurement units under Tools and options.Change the measurement units under Tools and options.Change the measurement units under Tools and options.Change the measurement units under Tools and options.Change the measurement units under Tools and options.Change the measurement units under Tools and options.Change the measurement units under Tools and options.

How do you change head gasket?

You will need more then just a question or two, to change a head gasket, least to mention, some good quality tools, including a torque wrench, to reset the factory torques. The head bolts must be systematically torque in the proper sequence. My suggestion is spend a couple of bucks, about $15, and buy a Haynes or Chilton's Repair and Tune-up book at your local auto-parts store. both Haynes, and Chilton's, will show you step by step how to do it, as well as the tools required. Depending on the year of your engine, plan a weekend to accomplish this.

What tools do you need to drop a gas tank 94 accord?

The tools needed to drop the gas tank of a 94 Honda Accord are screwdrivers, a socket set, and pliers. The tank is unbolted from the frame which allows it to be lowered from the vehicle.

Where are the heater pipe and the upper torque strut mounts on a 94 Grand Prix 3.1 liter engine and how do you replace them?

The heater pipe is at the rear of the engine and the strut mounts are on each side of the engine compartment. These are not easy to repair and you need special tools and a front end alignment ' when you are through.

How do you make Google your search engine?

Click on tools and then options (the bottom of the menu) . It says 'homepage', and then you can change the website address.

How do you change engine air filter on 08 Lexus ls460?

there's 2 of em (left and right). just pull up the silver engine cover (no tools) then release the latches on each filter and replace. can be done in 2 minutes with no tools. :)

Is a professional needed to change shocks on a 93 Camry?

No, you do not need to be pro to change shocks. You have to have some pro tools though: Torque wrench, spring compressors, tool box, Deep creep if you having problems with rusted bolts...

1997 ford escort how long will it take to change the timing belt on 1.9 engine?

About 4 hours considering if you have all the tools .

What kind of website is GearWrench?

GearWrench is a website that sells tools. These tools are mainly automotive like torque wrenches, pliers, wrenches, screwdrivers, nut drivers, and specialty tools.

Are the leather seat covers for the 2009 Accord difficult to install?

The leather seat covers for the 2009 Accord are very simple to install, as it doesn't require any tools at all.

Do auto shops have torque testers?

Yes most auto shops come equiped with the needed tools for torque testing. However, you may find that inspection stations, or lubes do not come with the ability to test the torque.

What tools do you need to change plugs on Mazda mx6 v6 engine?

ten mill plug socket and long extension bar on ratchet

Is it hard to change out a 5.2 liter engine if have another 5.2 liter engine?

Not really, although depends on your knowledge, tools and manufacture era of each engine. Fuel injected or carbureted. Actually can be done in 6 - 10 hours.

How do you replace a windshield on a 2001 Honda accord?

there bonded windscreens and you need specialist tools to remove and fit, cheaper to get the experts to fit it than pay out for all the tools

What is sold on the Tool Shop South African website?

The Tool Shop South African website offers many different types of tools. Some of the tools sold include power tools, torque wrenches, screwdrivers and automotive tools.

What is the best engine for search tools?

The best engine for search tools is google. Google provides many different search options, including tools to find geographical, biographical, and other types of information.

What is the procedure to change lower ball joints on a 1998 Ford Contour with 2.5L V6 engine?

You can do it with special tools and a manual on your car from the parts store or autobooksonline.com

Still have questions?

Trending Questions
Best foods for weight loss? Asked By Wiki User
How to lose belly fat? Asked By Wiki User
Unanswered Questions
Saan nagmula ang gitara? Asked By Wiki User
Uri ng tekstong nareysyon? Asked By Wiki User
Can you get Takis at 7 eleven? Asked By Wiki User