95
remove the caps at the end of the wiper arms. Unscrew the nut holding down the arm and it should come off.
It is under the wiper arms.It is under the wiper arms.
remove the cowl & wiper arms (mark location of arms on the windshield). disconnect the battery, Disconnect wire connector at wiper motor & remove the 4 mounting bolts then remove the linkage from motor.
The wiper arms have disconnected from the wiper motor. How do you reconnect them?
It is under the cowl at the base of the windshield. You will have to remove the wiper arms and the cowl cover to access.
Take off the bolts at the bottom of the wiper arms and you may have to wiggle the arms back and forth to work the wiper arms off.
http://letmegooglethatforyou.com/?q=how+to+remove+wiper+arms
Do you mean wiper arms or do you mean the wiper blade assemblies attached to the wiper arms? If assembly, then see sources and related links below for a wiper blade installation video for 1998 Mitsubishi Montero Sport (hook end arms).
The 1999 Buick Park Avenue has hook-end wiper arms. See related links below for installation videos. Press the tab or button in the area where the wiper blade is inserted into the hook and pull the wiper blade out of the hook. Sometimes you need to rotate and flex the wiper blade a little bit to make enough clearance.
Assuming that you mean "wiper blade" (blade and frame) which are replaced often rather than "wiper arm" (piece from the spindle at the hood to the wiper blade) which are rarely ever replaced. Also, this question can't be answered exactly without the model of the vehicle. That said, most Oldsmobiles that year have either standard hook end arms or side lock arms. See Sources and Related Links below for videos and wiper blade info.
All Mazda 626s 1986+ have the most common hook-end wiper arms. See Sources and Related Links below for installation videos. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.