The bulb is burnt out or has been removed.
The Chrysler Cirrus did not come out until 1995. You reset the check engine light with a scan tool or by unhooking the battery. If you have not repaired the cause of the code the light will come back on.
check the size of the engine, if it is the same it will fit
You can not disconnect the check engine light.
With a scan tool.
A flashing check engine light is an indication of a severe engine misfire.
You need a code reader to reset & plug into port.
You put the transmission fluid into the dipstick where you check it, do it with the engine on, and on a level suface
On my 98 Cirrus, replaced the fuel cap and then disconnected the battery for 10 minutes and the check engine light turned off. My wifes Lexus had a similar problem. Sometimes a different brand of Gas will do the trick too. ^ I tried this today and it worked! Thanks so much =)
Could be just about anything without more information. Check your oil level first.
A fast flashing check engine light is an indication of a running issue that is causing severe emmisions and catalytic converter damage. The normal cause is a harsh misfire. If you have it checked for codes, it should tell you which cylinder is the problem.
go to an auto parts store most will put on computer for you for free
Start the engine and idle in park. Pull the dipstick, wipe off and reinsert. Pull again and read the level.