Take it to a dealer
you should hire a contractor to inspect your water heater. it's probably very expensive to fix and you can't fix the broken water heater yourself. too bad.
the easiest way is to take it to a shop and let them do it, you have to remove the dash to get to it
Could also be a short to ground. If it runs all the time that's what it probably is. Get a wiring diagram and figure it out
Whats the easiest way to get broken cab mount bolts out on a 1994 chevy 1500 extended cab
Whats wrong with it?
Whats the easiest way to change my serpentine belt on my 2003 Toyota celica gt.I need a diagram
dont be black
dodge Dakota 1993 looses power pulling trailer up hills, whats wrong?
THERE IS A CHANCE IF THE DOME LIGHT IS STAYING ON IT IS NOT THE THE DOOR SWITCH, BUT WORN DOOR HINGE BUSHINGS,
With a master ball.
Mattress tester...you get to sleep all day
Be able to ACT!
trumpet cause you only have 3 buttons
P0161 is a Lambda heater sensor malfunction (oxygen sensor) located in the front section of the exhaust system.
An advantage of an oil free heater is that it is more efficient and it will heat up faster than others.
stay stacking bricks. HOPE ACADEMY
If the AC is Blowing cold and turn off and on, the AC/heater control switch is bad. Replace it on eBay for around fifty dollars. Work great now.
No there is not. Whats the problem no heat ?? If so try this, reverse the heater hoses on the heater core and then go drive the truck and see if you get heat.
If you mean the fan blows but sometimes the air is cold, it probably is low coolant (antifreeze) level in the radiator. Check the level AT THE RADIATOR, not the overflow tank, while the truck is cold.
Whats the problem? Blows cold air with the heat settings on?
Cold air blowing out of the heater is a sure sign of low coolant. Antifreeze running out of the front of the motor _could_ be a bad water pump. The two go together like ham & eggs.
ollie is acuallly the hardest but i gues so far its a shuv-it
The easiest way to peel the turnip is to use the chopping board. The turnip should be thoroughly washed before being peeled.