u ask someone else to do it 4 u!!!!!!!
2007 ford focus sedan , rear axle nut , at wheelbearing/ 235 nm --- 174ft/ lb
These were the options in 2000: [DMC]=Axle Ratio - 3.21 [DMD]=Axle Ratio 3.55 [DMF]=Axle Ratio 4.10 [DMH]=Axle Ratio 3.92 These were the options in 2000: [DMC]=Axle Ratio - 3.21 [DMD]=Axle Ratio 3.55 [DMF]=Axle Ratio 4.10 [DMH]=Axle Ratio 3.92
The rear differential is where the driveshaft meets the axle. Its right in the middle of the axle and is about the size of a basketball.
The 2000 Ford Explorer owners manual shows : Motorcraft SAE 80 W - 90 Premium Rear Axle Lubricant for the FRONT axle
if 2000 and above, it should fit between 34mm to 36mm depending on axle, most are 36mm 35mm
The 2000 Ram had u joints, not cv joints at the front axle.
You can buy and OEM CV axle kit at most auto-parts stores. Most national auto-parts stores have the axle kit available. The OEM axle kit will be about half the price of the dealership price.
The axle retainer nut is likely to be the same as on the 1998: 30mm
In order to dissemble the rear axle on a 2000 Honda TRX 300 first determine if it is inner or outer joint. You then remove the retaining ring behind the boot to access the axle.
233 Ft Lbs
if clicking is in turns than a front axle needs replaced. if turning right it is your left axle-- turning left it is your right axle!! the clicking is the cv joint in axle.
The axle nut on a 2000 Tiburon is 32 mm. These nuts are incredibly hard to remove and is usually easier to use an impact gun to loosen it.
If you are asking about rear axle gears, no. The XJ has a corporate axle and the ZJ has a Dana axle.
32mm for the axle nuts.
2000 f150 fron axle nut
A Nissan Altima with a cracked axle. Meaning the part that connects your tire to the transmission is broken....
rear axle diagram ford 350 2004
The retaining clip on the end of the axle is distorted. Replace the retaining clip with a new one. Position the retaining clip with the opening facing up when installing.
34mm</> It is right
180 foot lbs