well yes and no yes it Will represents letter but as a function of an ASCII code like digital 41 Will represents the letter A
The transfer of digital or analog data using digital or analog signals refers to the process of transmitting information from one device to another, either through digital signals or analog signals. Digital signals are electronic signals that represent binary data, while analog signals are continuous signals that represent continuous data. The method of transfer depends on the type of data being transmitted and the technology being used for the transfer. For example, digital data can be transferred using digital signals through a computer network, while analog data can be transferred using analog signals through a telephone line. Regardless of the method used, the goal of the transfer is to accurately transmit the information from one location to another.
A computer cannot read data from sensors directly because the signals received from the sensors come as analogue signals which, a computer cannot read. It requires a converter to convert the signals in to digital signals so the computer can be able to read it.
Computers_send_and_receive_data_in_the_form_of_signals
No, it is an output device. It outputs sound waves.
Higher immunity to noise, storage of digital signal is cheap and easy, its representation is only using two levels as opposed to infinite levels for analog
Digital signal is moreefficientimmune to noiseerror freethan analog signal.
The digital signals is not converted BACK to analog! it is transmitted in digital form and the receiver is converting it back to analog to drive the speakers. The signal from the microphone is converted from analog to digital with an A/D converter chip, digital signals consist of pulses of different lengths that is switching the transmitter on and off in about the same way as the old Morse code transmissions but at a much higher rate (millions of times higher)
It's usually analog, but digital signals can be converted, if needed.
The Morse code
Information about a digital to analog converter can be found on the site Hardware Secrets which divulges that real world signals such as light and sound can be converted into digital signals by a circuit called ADC (Analog-to-digital converter) so that the information, once converted, can be processed and stored digitally.
Modulation
The transfer of digital or analog data using digital or analog signals refers to the process of transmitting information from one device to another, either through digital signals or analog signals. Digital signals are electronic signals that represent binary data, while analog signals are continuous signals that represent continuous data. The method of transfer depends on the type of data being transmitted and the technology being used for the transfer. For example, digital data can be transferred using digital signals through a computer network, while analog data can be transferred using analog signals through a telephone line. Regardless of the method used, the goal of the transfer is to accurately transmit the information from one location to another.
The signal directly from the sensor is analog. It is than converted to digital, and a digital signal is used for processing. The signal directly from the sensor is analog. It is than converted to digital, and a digital signal is used for processing.
Satellite TV Providers transmits the signals through their satellite dish converting it first from digital signals to analog signals. These signals which were converted will be transmitted to the satellite. The satellite will then transmit the analog signals per request of the satellite dish connected to the receiver of the subscriber. Once signals are received, it will be converted back to digital signals which can be read by the receiver and be displayed to the television.
Set top box is basically used to convert the digital signals broadcasted by digital signal broadcasters to analog signals, in case you wish to have your analog tv, but would like to have an access to digital channels. Digital channels definitely have better quality signals than analog and therefore you will have a better picture quality and signal quality even though you have converted the digital signals to analog.
Primarily because digital systems are more accurate. Additionally, digital technology is replacing older systems with modern devices because digital devices are often much smaller, and require less maintenance.
Digital is an upgraded audio and visual signal. There will be a transition in the United States on February 17, 2009, where all broadcast analog signals will be converted to digital signal.