The phase rotation of motor should be always done from motor side i.e The motor terminal box.
There are two alternate methods depending on whether the motor is single phase or three phase. On a single phase motor, reverse either the start winding coil lead or the run winding coil lead but not both. This action will reverse the motor's rotation. On a three phase motor, interchanging any two of the three coil leads will reverse the motor's rotation.
Use a small three phase motor to see if it rotates in the same direction as connected to the mains.
Very Simple Inter change any one phase, in three phase suppose u connected R.Y.B phase to U.V.W In motor terminal, change it to R.Y.B to V.U.WAnswerAll that is necessary is to interchange any pair of line conductors.
by changing the polarity of capacitor of single phase ceiling fan can we change the direction of rotation from anticlockwise to clockwise
In Canada the phase sequence colours are A = red, B = black and C = blue. As for CCW rotation on a three phase electrical power system I presume that you are talking about motor connections. There are meters that can be connected to the motor not connected to the system. You just spin the rotor in the direction that you want the motor to run when connected and the meter will tell you what the connection will be to the power system to obtain that direction. Be it ABC or CBA.
A phase rotation meter. Or a small three phase motor can be wired up and its rotation observed.
We can convert a 3 phase ac motor into generator by changing phase sequence of the ac input cable of that motor
There are two alternate methods depending on whether the motor is single phase or three phase. On a single phase motor, reverse either the start winding coil lead or the run winding coil lead but not both. This action will reverse the motor's rotation. On a three phase motor, interchanging any two of the three coil leads will reverse the motor's rotation.
Any three phase motor can be reversed in rotation by inter changing any two of the motor's incoming feed conductors. For example connect the motor winding wires to L1, L2, L3 and the rotor turns clockwise in rotation. Connect the same motor to L3, L2, L1 or L2, L1, L3 or L1, L3, L2 and the rotor turns counter clockwise. As you can see any combination of the two wires will reverse the rotors rotation.
If you are talking about a switch that is used to change the direction that a single phase motor turns from clockwise to counter clockwise, the switch is called a forward - reverse drum switch. By reversing any two of the three phase legs that feed the 3 phase motor. <<>> On a single phase motor a drum switch is used. This switch reverses the start winding so that when voltage is applied to the motor it will revolve in the reverse direction.
Use a small three phase motor to see if it rotates in the same direction as connected to the mains.
Switch two of the three wires.
Reverse any two line leads connected to the motor will reverse the directional rotation of the motor
Since it can only rotate two directions, the chance is 50%. There are rotation indicators you can buy to check the phase sequence.
Very Simple Inter change any one phase, in three phase suppose u connected R.Y.B phase to U.V.W In motor terminal, change it to R.Y.B to V.U.WAnswerAll that is necessary is to interchange any pair of line conductors.
A single phase induction motor is not self starting; thus, it is necessary to provide a starting circuit and associated start windings to give the initial rotation in a single phase induction motor. The normal running windings within such a motor can cause the rotor to turn in either direction, so the starting circuit determines the operating direction.
by changing the ryb phase altornat e.g. rby ,bry , yrb we change the direction of the induction motor .. . ..