0
After you have tiled, normally you will add the bonding liquid or sealant to the grout mixture. however there are liquids on the market that you can spray onto the tiles to seal the grout, however this is a temporary and not a recommended idea. It is better to scrap all the old grout out and re-grout with the proper mixture
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
Do you seal tile before you grout?
It depends on the type of tile you have. If the tile is unglazed and porous (as mostly all travertine is) then you will need to seal the tile before you grout it so that the grout does not soak into the tile and cause it to become dull. Follow the manufacturers recommendation for the tile that you have.
Do you seal travertine tile before you grout?
It depends on the type of tile you have. If the tile is unglazed and porous (as mostly all travertine is) then you will need to seal the tile before you grout it so that the grout does not soak into the tile and cause it to become dull. Follow the manufacturers recommendation for the tile that you have.
How do you clean engine oil from grout in tile?
if your grout had not been seal then it will be hard to clean and if you clean with acid the grout will be change color.
Do you seal slate tile before you grout?
Use a high-quality sealant and its specifications depending upon the requirement would be the best solution for the slate tile before grout.
What is the best seaant for tile?
Aqua mix brand of sealers is some of the best and will seal both your unglazed tile and grout. You need to use a penetrating sealer because it will chemically bond to the grout.
Do you need to seal tile floors?
Yes. If it is a ceramic or porcelain tile you only need to seal the grout. If you have a natural stone or quarry you need to seal the tile and the grout. Generally when you install natural stone, you seal the tile before you grout. Otherwise the colorant in the grout will seep into the tile. If the floor is existing you would seal it all at once. Don't forget to use a stripper to remove any old sealer. Make sure the stripper is acceptable for the type of flooring you are sealing. Stone can be very delicate and damage easily. Vinegar can etch marble, granite, and travertine. One last note, you get what you pay for with sealer. Invest in a good sealer and you will get much better, much longer results.
tile and grout cleaning?
form_title=tile and grout cleaning form_header=11813 Describe the kind of service you are looking for.*= () Clean / Seal grout or tile () Stone or marble polishing () Replace or repair grout Give the type of surface that is involved?*= [] Kitchen [] Bathroom [] Countertops [] Backsplash [] Tub / shower or surrounding area [] Walls [] Floors [] Outdoors
Can you use floor wax as a sealer for ceramic tile?
Tile has a glass finish & doesnt need wax, Wax can cause a slip & fall hazard when it gets wet Sealing tile is a misnomer, you really only need to seal the GROUT.. stop by the Depot & get some grout sealer, better for the grout
If using floor tile on a shower wall do you have to seal it?
As long as it is not natural stone only the grout must be sealed.
How can you install tile without grout lines?
No, the grout allows for tile expansion and contractions, without it your tile could crack but there are some tile that can be installed with minimal (1/16inch) grout lines.
Tile Grout?
form_title= Tile Grout form_header= Give your home a face lift with new tile grout! Do you want to install new grout?*= () Yes () No () Not Sure Do you want to clean out old grout?*= () Yes () No () Not Sure What color do you want the grout?*= _ [50] How old is the grout in your home? *= _ [50]
How do you tile?
With grout
