Your question can not be answered as it is.
Reword the question - is it about induction motors or synchronous motors, for example?
slip power is a power which is develop by the induced voltage and current in an induction motor
induction motor is AC motor also synchronic motors are AC motors but second one has not slip but first one has slip . shut motor is DC motor
short the rotor terminals.
Both 3-phase induction motors and single-phase induction motors have rotating magnetic fields assuming that the single-phase motor has one of the usual starting mechanisms built-in. The synchronous speed is given by RPM = 120 X f / p where f is the frequency and p is the number of poles. The conductors in the rotor pass through the magnetic field of the stator at the slip speed. As a result an alternating current is generated in the rotor. The frequency of that current is the rotor frequency or slip frequency given by slip frequency = slip speed X p / 120. At full load, the slip speed of a standard, 3-phase motor is about 1% to 2.5% of synchronous speed. A motor with 6% slip would be classified as a high-slip motor. The slip of a standard single-phase motor could be 6%.
Synchronous motors have unmeasureable slip because they stay in sync with the input line frequency.
An individual can obtain an ownership slip at the local Department of Motor Vehicles. Ownership slips can be obtained for different types of vehicles.
A synchronous motor runs at synchronous speed, so there is no slip, or zero slip.
A synchronous motor runs at synchronous speed, so there is no slip, or zero slip.
in case of induction motor the rotor speed is less than synchronous speed giving positive slip but in case of generator the rptor speed is greater than synchronous speed giving negative slip.......
Ac motor have slip ring, to remove the slip ring,connected to the commutator its a dc motor.
Yes a slip ring motor is there. There is a slip ring and a brush in the motor to add external resistance to the motor inorder to be able to control its speed.
slip power is a power which is develop by the induced voltage and current in an induction motor
the difference between the synchronous speed and actual speed is called as slip
how to calculate resistance box for slipring motors
If you are talking about slip in a conveyor belt connected to a motor, the answer is there will not be any effect on the motor, but the slip will cause the efficiency of the connected device.
induction motor is AC motor also synchronic motors are AC motors but second one has not slip but first one has slip . shut motor is DC motor
when actual flow(Qact) in pump is greater than theoretical flow (Qth) then negative slip occurs....