If the chirping noise speeds up as the truck speeds up, check the u-joints in the drive line.
It is possible the subwoofers are causing a chirping sound, you would be best taking them to a local dealer in your area and asking for professional advice
I have chirping sound when I excelerate. When it is damp or raining it chirps alot more. I have had it to a mechanic and all he did was give me a can of lubricant and told me when I hear it spray the area and this should take care of it.....well quess what it hasn't so i need some help or advice. The noise drives me nuts!!! Does or can anyone help me with this problem? would be forevre gratful !!!!!!! THANKS YOU
Probably a sticking lifter; put in a can of RISLONE every time you change oil for the next few times; that should do it if it is just a minor problem. A chirping noise can also be a defective drive belt. I haven't heard of a chirping noise before, but I've heard of lifter tapping. If it's just some light lifter tapping, add some Lucas oil stabilizer next oil change. This is really good stuff that adds extra lubricants and protectants to the oil for better engine performance and durability. Adding this to your oil should take out any light lifter noise or tapping. I run this in my 94 Z along with full synthetic Mobil 1. They make the Lucas oil stabilizer in synthetic as well. Hope this helps you out.
The Trees Buffer most of the noise in one area and reduces it in the other. When you cut a tree down, it increases noise in the other area due to no tree buffering the noise.
Depends on the make/model of your car and the desired performance of the injector, but generally in the area of $25 - $300 for the part.
Be re-warmed to normal body temperature.
Crickets chirp more when they are cold, so warm the area. Otherwise catch them and throw them outside.
Because it has been a long time since the sun warmed your area.
the clicking noise could be you lifters are starting to go bad or your valves might be bent a lil. eather you should just take it to the shop and have them look at it soon or you could blow your motor.
cause it does
That ist the energy of noise. Sound intensity = sound power divided by area.
there is a rattling noise in the area of the serpentine bell
Spray hairspray on the belt if it is making the noise or replace the belt or the pulley if its making the noise.
Describe the noise and the general area it is coming from and I would glad to answer the best way I can.
Remove the fuel rail, the injector just pulls out. Make sure area is very clean. Replace all o-rings.
warmed air sinks, creating a high-pressure area as it falls.
Cracked Fly Wheel
A noise detector is a device to use in detecting noise in a certain area or room. Detection device can be set or program accordingly to a desired level of noise or decibels (db) to activate the alarm for the detector,
Rubbing noise from front axel area
The noise ordinance decides on how loud each person can be in the area. It will also have a curfew time on it.
Sounds like a bad bearing in your front driveshaft. (Double-cardain joint) Its the u-joints closest to the transfer case. Saturated this area with a good penetrating oil will temperarely eliminate the squeaking. You can get a replacement bearing for about $90 at NAPA.
It's called a rain shadow.
Each city or town has a noise ordinance and the hours when they do not allow construction noise can vary by location but they all ban construction noise during the night. Construction noise is allowed during the day from hours that can vary from 7:00 am until 8:00 pm and can be earlier or later depending on the area.