55 degrees.
hardness is defined as a resistance to plastic deformation or penatration.Hardness is defined as the ease with which hardness may be attained by quenching . It is also defined as the ability to develop maximum hardness by quenching.It is the process to have a hardened layer of marten site after quenching and also to have high hardness at same given depth. The material which having low critical cooling rate have high hardenability.The factors which reduce critical cooling rate increase the hardenability.alloy steels have low critical temperature. In plain carbon steels are contain not more than .5% of silicon and 1.5% of manganese.These steels are strong,tough,ductile and used in expensive materials.Increase in hardness and strength in plain carbon steel is depend upon the presence of carbon content.
Through hardening Process & Polymer quench 20% - As quench Required hardness - 35 - 40 hrc.
52.22 °C is the maximum temperature on Saturn.
there is no maximum temperature only a minimum.
There is no maximum required clearance
The maximum temperature is attained when the reaction is completed.
The average temperature annually at Savanna is 19.1 Degree centigrade.Avg. Maximum Temperature: 24.70C. Avg. Maximum Temperature: 13.3 0C
Xlpe maximum working temperature is 90 and minimum working temperature is 0 c
It is the time delay between a maximum or minimum insolation and maximum or minimum air temperature
The maximum recorded temperature in Lahore under the shade has been 48.3 degree Celsius.
The temperature must be under the decomposition temperature of the substance.
32