Want this question answered?
after you get the light shinig on your carpet look up then stand on the ? switch
The trunk light switch on a Pontiac Sun Fire is typically in the latch assembly. This is usually inside the trunk and under the carpet.
If the switch, light bulb, and source are all connected in series and the switch is ideal (has no resistance), then the switch acts as a short. There is no potential difference across the short.
Put a jumper wire across the terminals on the switch if the lights work (with ignition switch set to "on" position) switch is defective
Trunk. Driver's side, behind the fiber glass carpet
If you have one wire into your switch box for your light. this is called a switch leg, the dimmer should be wired across the black and white wire wires.
It is the brakes light switch
where is brake light switch
To control a light with a switch, the switch has to be connected in series with the light fixture.
If some electrons are stripped off of a material object, by friction, high-frequency light, or scuffing across the carpet for example, the object is left positively charged.
It's below the glove box passenger side. Remove piece of carpet held by 3 clips. look for a connector with some white wires. Just twist the body of switch and pull it out.
A light bulb is wired up to have a current run through it to produce light light. when you disconnect the wire to one end of the light bulb there is no longer a current flowing through it and the light go's out. A switch is a device that is able to disconnect or connect the wire. or otherwise put cause a break in the wire so that power will not run through it.