0
Hi the timing marks are 1 on the bottom plastic cover at approx 12 clock the other on cam pulley behind line it up with the tappet cover hope this helps cheers Peter
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
Cam belt timing marks Fiat Scudo 1.9TD?
belts
How do you set timing 98 Subaru Outback?
Timing is done by Engine computer with imfo from cam and crank sensor . It is not adjustable. If you are replacing timing belt, a Gates timing belt comes with detailed instructions of belt and pulley timing marks. New belt has marks on it that correspond with cam shaft pulleys and crank pulley.
Cam belt Timing marks for a corsa 1.2 16v?
looking for the timing marks corsa c 1.2 16v
You are changing the timing belt and you need o know where the timing marks are for the cam shaft and the crankshaft on a 1994 corolla Also how do you align the marks to put engine in time?
You are changing the timing belt and you need o know where the timing marks are for the cam shaft and the crankshaft on a 1994 corolla Also how do you align the marks to put engine in time?
WHERE are the timing belt marks on a 1994 Honda civic ex?
The timing belt marks on a 1994 Honda Civic are found on the cam shafts. The arrows will needed to be point a TDC in order to install the belt properly.
Is a cam belt a timing belt?
Yes , a cam belt and a timing belt are the same thing
What are the Rb20 timing belt alignment marks?
for the cam gears its right on the upper timing belt cover plate, and for the crank, theres a mark on the crank collar
Is the cam belt and timing belt the same thing?
I have never heard of a cam belt, but a timing belt does drive the cam or cams
Timeing marks Mercury Villager 2000 sport?
The marks are on the cam and crank sprockets, and on the timing belt. They all must match.
Honda Passport timing marks?
My honda passport 3.2 litter, to set the timing my belt has three timing marks on the outside of the belt, crank the motor over till you see the two belt marks towards the top of the cam shaft or around thier if one is at top the other cam can not be seen so botn cams have to be tilted set both belt marks to the cam shaft marks. When the belt comes off dont get the cams out of phase they tend to unwind a bit, put back. A nd the crank shaft has a green timing mart on it after you pull off the pulley and cover, so match the other timing belt mark on the belt to the crank shaft mark then put the tensioner back on now it is on dead set timing.
Timing marks on a single cam neon?
how to set the timing marks on a single cam dodge neon
What is the timing for a Kia Sportage?
it is auto timed thru the cam shaft and crankshaft sensors.You cannot change it. The timing belt has timing marks when you change the belt in which you line up the crank and cams.
