The wiring on the back of your 2000 Pontiac alternator consists of a wiring harness. The wiring harness goes to a few relay switch is and regulators.
It Is Behind The Glove Compartment...It Should Have A Blue Wiring Harness Conector.
Follow the wiring harness from your blinker. Disconnect the factory harness from the relay. Replace with the new relay.
There is a wiring harness most everywhere you look on that and any vehicle. Be more specific.
In my case on a 2001 Dodge Intrepid, there were two bare wires in the wiring harness coming into the trunk lid. It was in the area where the wiring harness is clamped to the trunk (left side) just at the lip of the trunk recess. I wiggled that harness and got the dash trunk light to flash on & off. Peeling back the wiring harness cover at that point revealed the bare wires. Taped them off individually, and then retaping wiring harness at that point solved my problem.
The purpose of the wiring harness is to help keep wires together instead of hanging freely. You can purchase a new wiring harness at any auto repair shop.
The wiring harness can be removed by unplugging all of the wires. The wiring harness is also held in place by several retaining screws. Remove the retaining screws.
The factory wiring harness for the trailers will plug in under the back of the vehicle in the area of the spare tire, the harness plugs into the wiring harness for the tail lights.
It depends on which Harness you are looking for.
2006 Dodge Dakota - Where do i find the trailer wiring harness
How to remove a glow pug wiring harness from a 6.0
for what? be more specific. Do you need the harness which you will need to contact a parts store for or do you need a wiring diagram? If you need the diagram what do you need it of? A chiltons or vehicly manufacter will have diagrams of all the wiring ciruits in you vehicle.
A cable harness, also known as a wire harness, cable assembly, wiring assembly or wiring loom, is a string of cables and/or wires which transmit informational signals or operating currents (energy).
Since the wires in a Toyota are all different colors, all you have to do is go to a car radio store and ask for a car stereo Toyota wiring harness. It will come with intructions but basically all you have to do is plug that thing into the cars factory harness and hook the stereo up. It worked for my Camry 1990
very easy .I bought my wires on eBay ,,,the trailer harness plugs right into your lights no cutting at all
Find a company that sells wiring harnesses and they will be able to get a harness. Most of these include the wiring details. Look on eBay for 'Stereo Wiring Harness'
Subarus all have a connector for a trailer wiring harness built in. There is a supplemental trailer harness that you purchase from your hitch supplier and it just plugs right in. Instructions are available on-line. This one is for a 2001, but they have been the same for a number of years.
most likey a wire that is grounding out some where around your fuel injector wiring harness or a loose ground wire
they are entirely different. unless you are a really good fabricator and youre willing to change the entire wiring harness including the computer, dont bother.
You can find a radio wiring harness for your 1997 Ford at most auto-parts stores. Many electronic stores will also have the radio wiring harness.
You can find a trailer wiring harness for a Chevrolet in a Haynes repair manual. The manuals are available at most auto parts stores.
get the wiring harness from the explorer or donor vehicle that you get the 4.0 from, you need the harness from the 4.0!!!