It saves waste water backing up to or from the washing machine.
The hose has to be at least at the top of the washer.
1920's washing machines didn't have a lid. You would have to get the hose from the garden and fill the washer machine up!
The washing machine leaks as soon as it is turned on is probably due to an obstructed flow. Check the drainage hose, and make necessary adjustments.
On almost all washing machines it is attached immediately below the centre of the tub. It will be easily recognisable by the thick hose going to the back of the machine.
wash your gear... then clean the washing machine, or hand wash it out with the hose and soap
It means where the water will be coming from. So you attach the water hose from tap to water inlet of the washing machine so that it can draw water and use it in the machine. The water outlet is where the waste is dispensed.
To connect a washing machine drain hose to a flexible hose it is proper to seal the union with plumbers tape and a hose clamp. Silicone should not be used because it may come loose and get into the drainage system. If Silicone is used it might also be necessary to cut the hose when removing the washer drain hose.
Contact the service centre-that is what we did.
......before, but I would not recommend direct drain. The washing machine hose must extend up above the flood rim of the washing machine before entering the drain. If not, there is a possibility of sewage backing up into your washing machine.
Washer supply hose, 3/4 x 3/4Water , or you could mean drain line hose. Drain
Make sure hot and cold supply go to hot and cold on washing machine regardless of what is marked on hose. Hoses are marked so hot and cold don't get mixed up, that's all.