There is 2 bolts on the back of the transfer case. one is lower than the other for draining and one is a few inches higher for filling and checking.....I'm actually asking a question on here as to what size it is, because it's not a bolt you can put a socket on. it's almost like a oversized allen-key.
Dextron II
11.2 quarts
You add fluid the same place you check the fluid level.
check to see if your transfer case has to much fluid in it . remove upper plug .
The automatic transmission fluid temperature sensor on a 1997 Chevy Blazer S10 is located on top of the transfer case. It is in the engine compartment.
The transmission fluid on a Chevy Blazer can be checked by idling the engine and allowing it to reach operating temperature. The dip stick can then be removed and checked based on the markings provided.
You can use any type of SAE certified transmission fluid in your 1997 Chevrolet Blazer. You can check the transmission fluid level with the transmission fluid dipstick.
That is a must, It has to have fluid in it are it will burn up.
transmission- 80-90w gear oil transfer case - atf tranny fluid
Look in reservoir and make sure it is at least at the minimum mark
You fill in the same place you check it at the top left above your engine
change ur rear differential gasket or ur transfer case is leaking