Hey well I am no expert but I need to do the same thing and the cheapest way I can think of is call around to some salvage yards and ask for your type of car and ask them for the parts you will need and if they do have your type car there and interior is in fairly good condition then they can show u how to take and replace what u need to do,thats how I get a lot of my parts for all my cars,9do some sanitizing and cleaning b4 installing0.....peace
You will need to remove the front engine cover, on your 1997 Pontiac Bonneville, in order to change the supercharger belt. Loosen the tensioner pulley to remove the belt.
To change the serpentine belt on a 2003 Pontiac Bonneville, loosen the tensioner pulley and remove the old belt. The tensioner pulley is the wheel in the belt system that has a bolt through the middle in a slot that can be adjusted. Put the new belt on and tighten up the pulley.
diagram for serpentine belt on 1996 Pontiac Bonneville se
Go here for your answer: http://www.cardomain.com/memberpage/338233/4
Jiffy Lube offers oil change services, filter replacements, and belt replacements to name a few. Also Jiffy Lube can do inspections for additional problems.
What is the procedure for replacing the belt tenison pully on a 97 Bonneville v6 3.8 engine
A diagram for the serpentine belt for the 1995 Bonneville can be found in an Chilton's manual for that year and make of vehicle. The belt diagram varies depending on the exact vehicle engine type.
take off serpentine belt unbolt powersteering pump and hoses and drain it. That's it.
Only if it is an early mk2. All mk1 sharans, galaxy's and alhambras have 6 3point harnesses and a lap belt in the centre seat.
Yes, I need a diagram of the serpentine belt for a 1997 3.8 liter Bonneville SE without a turbo charger.
It has a timing chain. I have the OEM service manual for that year Bonneville, and it shows a timing chain.
It's in your owners manual
You don't have to. What you can do is take one bolt off the mount, slide the belt in the space. Then take the other bolt off and slide the belt the rest of the way. Remember to put he last bolt back on.
It's in your owners manual
advance auto if located in your area
diagram of ur belt should be right under ur hood..should be a sticker there showning how the belt should fit
NO! Do not drive that car w/out the supercharger belt attached!
just need to know where it is located on car
Use a wrench to loosen the tensioner which keeps tension on the belt. Once this is loose, pull the belt off of the tensioner. It will then come loose from the remaining pulleys (A/C compressor, water pump, etc.). A diagram should be located on top of the radiator showing the path of the belt to help you know how to install the new one.
you have a belt tensioner you need to put a big socket wrench on it and push down on it and it will lift it up to release the tension on the belt. do the same thing to put it back on
The tensioner belt is interchangable as both vehicles use the same engine, the GM 3800
How to Change belt on 2005 corolla?
Grab some tools and get started if its anythinh like a gmc Jim good luck lol tention for serp belt is a pain in the butt..alternator has to come out too your an idiot, this says nothing on how to change it.
it should be on the right side right neer the belt