The speedometer is fed by two wires (one black one white wire) from VSS 2. This pair works its way through multiple connectors to pins 2 and 3 on a 3-pin connector in the back of the combo meter (i11, all three pins next to each other). The wires maintain their color all the way to the instrument cluster according to the shop manual. The speedometer then feeds a green wire with black stripe that exits the combination meter. This wire finds its way to both the TCU and cruise control according to diagrams. This wire is on pin 10 of connector i10 (light gray, 16-pin, each pin next to the other) at the combination meter. There is a wire that leaves the speedometer circuit for ground, for four connections in total.
electronic
I want to replace the non-working speedometer cable on my 90 subaru legacy are there any free graphics and instructions to show me how to do it and what it looks like and where it is?
Guess! And follow ppl.
Go to bulldogsecurity.com they have wiring diagrams for all years,makes,models.
== == mitchell on demand is best source of wiring diagrams. better than subaru in my opinion
How do you replace the Catalytic converter on a 1991 Suburu Legacy L station wagon? Where I get the used parts?
OVER 9000!
it Goes from the Gauge Cluster. throught the firewall and connects down in the top passanger side of the tranny
In the fuel tank.In the fuel tank.
on top of the fuel tank
no fuse, but there is a cable. it is in 2 parts. check the cable at the transmission to see if it came unplugged. good luck
6.5 x 6.5 inches, both front and rear.