Stick the starter in the cutlass supreme.
cutlass supremes are so baller
go to the parts store and get a rear view mirror mounting kit and follow the instructions to a T.
It takes a special gauge to install the crank sensor. It can be rented from some parts stores.
Begin by removing the serpentine belt from your Oldsmobile Cutlass. Remove the tensioner pulley retaining bolt. The retaining bolt will be in the center of the pulley. Reverse the process to install your new belt tensioner.
Its 2 9/16 bolts and 2 wires... Its 2 9/16 bolts and 2 wires... Its pretty easy if its a Supreme
Remove the wiring harness from the back of your 1995 Oldsmobile Cutlass blower motor. Remove the blower motor retaining bolts. Remove the fan from the front of the blower motor. Reverse the process to install your new blower motor.
if you look at your dist. towards the front of the dist the is a little square box. on the right it says batt and the left it says TACH. get a connector and wire it up.
Remove the power steering hose. Remove the power steering belt. Remove the power steering pump retaining bolts. Reverse the process to install the new power steering pump on your 1985 Oldsmobile Cutlass.
Remove the oil pan, unbolt the pump, install the new pump,the pump drive is off the bottom of the distributor and must be aligned to go in properly.
Insert the install disk, click install and follow the instructions. OR Download the program, save it somewhere you can find it, click the .exe file and follow the instructions.
I need to install rain gutters on my house. Do you know where i can find step by step instructions on how to install rain gutters?
there is not a specific torque for the idler pully. tighten it up with a ratchet and it will not loosen up
You can find instructions to install your wireless remote at your local electronics store. The instructions should be included with the wireless remote.
Read the instructions
Remove fuel tank for access
Boot with Windows install disk and follow instructions.
It is a relatively easy install if you have instructions on how to do it.
The best place to go to find instructions on how to install Windows XP is the Microsoft website. It shows one how to install it in addition to how to upgrade to newer programs.
Replacing the brake pads on your 1982 Oldsmobile Cutlass is quite easy. Remove the brake pad Springs and caliper. The brake pads will come off. Reverse the process to install the new brake pads
Spray lubricant on hex fitting of antenna(mounted on fender) Unscrew fitting.Follow antenna cable back thru fender wall.Unplug where it mates with same size cable. Reverse for new install
Seems silly.. take out the old one, and install the new one. Pull the carpet away from you in the trunk by your brake lights, and you'll see 3 screws with plastic wingbolt lookin things. Unscrew all of them, and you can pull the entire assembly out.
Yes, this item comes with step by steps instructions for anyone to install.
Simply run the disk on your cd drive and follow the instructions to install it.